Osma Squareline Pipe Connector & Bracket Stand-Off - White

This connector is specifically designed for the Osma 61mm square downpipe system.

While the downpipe itself can be adapted to a 68mm circular pipe, this connector is for 61mm square downpipes. You would need an appropriate adaptor to connect to a circular system.

The Osma Squareline system, including this connector, is typically made from durable, UV-stabilised PVC.

Yes, the bracket stand-off is integral to the connector and comes pre-attached, simplifying installation.

Ensure the downpipe ends are clean and pushed fully into the connector until the internal Flexiclip seals engage. A silicone lubricant can help achieve a secure fit.

The Osma Squareline system is primarily designed for domestic buildings. For commercial applications, different systems may be more appropriate.

The appropriate wall fixings will depend on your wall material (e.g., brick, masonry, wood). Stainless steel screws and wall plugs suitable for your wall type are generally recommended. These are not typically included with the connector.

Ensure the downpipe ends are fully inserted into the connector and that the Flexiclip seals are correctly seated. Check for any damage to the seals or the pipe ends. Reapply lubricant if necessary and re-secure the connection.

Verify that the wall surface is even and that the integral bracket is not obstructed. Ensure the correct wall fixings are being used and are securely fastened. Check if the downpipe itself is properly aligned.

Check if the downpipe ends are clean and free from obstructions. A small amount of silicone lubricant can aid insertion. Ensure you are using the correct 61mm Squareline downpipe sections.