HT Leads Ignition Cables Set - NGK - XC766

This set is specifically compatible with PEUGEOT 309 II (3C, 3A), 405 I (15B), 405 I Break (15E), and CITROËN BX (XB-_). It also cross-references with CITROËN/PEUGEOT OEM references 5967L2 and 97535465. Always use the vehicle's make and model tool to confirm fitment for your specific vehicle.

Symptoms of worn HT leads include engine misfires, rough idling, reduced engine power, poor fuel economy, and difficulty starting. Visual inspection may reveal cracking, burning, or physical damage to the insulation.

Yes, the set includes five ignition cables with distinct lengths: 195 mm, 175 mm, 265 mm, 355 mm, and 455 mm. These are designed to match the original routing for specific engine configurations.

SAE refers to the Society of Automotive Engineers standard for the connectors used on the ignition coil, distributor/rotor, and the ignition cable itself. This ensures a common and reliable connection type.

It is strongly recommended to use the complete set as intended by the manufacturer. Mixing leads from different sets or brands may result in incorrect lengths, incompatible connectors, or inconsistent performance.

HT leads (High Tension leads) are the cables that transfer the electrical charge from the ignition coil (or distributor) to the spark plugs. The ignition coil itself generates the high voltage.

Double-check that each HT lead is connected to the correct cylinder and distributor terminal. Ensure connections are fully seated and secure. Verify that the cable lengths match the original configuration.

Ensure you are using the correct lead for the specific cylinder/terminal. Sometimes a slight twist can help the boot seat properly. Avoid forcing the connection, as this can damage the lead or terminal.

This could indicate a persistent misfire. Re-inspect all connections and ensure the correct leads are installed. If the issue persists, the problem may lie with another component (e.g., spark plug, ignition coil).