Shopping.co.uk

Fischer FXA Throughbolt - Silver

Fischer FXA Throughbolt - Silver

A fixing for flexible use in non-cracked concrete and is suitable for pre-positioned and push-thro...

Best current price£11.99from Amazon

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
Amazon£11.99Visit shop

Fischer Zinc Plated 523135 Fxa Through Bolt Wall Anchor 10/50 X 125 Mm, Set Of 20 Pieces

Visit shop

All Offers

4 offers from £11.99 - £20.08

View price history by clicking the chart icon.

AmazonFischer Zinc Plated 523135 Fxa Through Bolt Wall Anchor 10/50 X 125 Mm, Set Of 20 Pieces
£4.49 delivery
£11.99
Visit shop
OnBuy.comFischer 523136 Fxa Through Bolt Wall Anchor 10/100 X 175 Mm, Zinc Plated, Set Of 20 Pieces
Free delivery in 1–3 days
£18.90
Visit shop

Product Information

Full details

This guide is for users of the Fischer FXA Throughbolt - Silver, a versatile fixing solution for non-cracked concrete. The primary benefit is its flexible use with pre-positioned and push-through installations, offering maximum load-bearing capacities. Note that this product is specifically designed for use in non-cracked concrete; its effectiveness may be limited in other materials. This guide provides essential information for effective usage and care.

All features

ColourSilver
Model Part Number523136
BrandFischer

Extended Product Information

FAQs

What type of concrete is this fixing suitable for?

The Fischer FXA Throughbolt is designed for use in non-cracked concrete.

What tools are needed for installation?

You will need a hammer and a wrench for tightening the nut.

How do I determine the correct hole diameter and depth?

Refer to the product specifications or the packaging for exact drilling dimensions.

What is the benefit of the pre-assembled design?

The pre-assembled expansion shield simplifies and speeds up the installation process.

Can these throughbolts be used in outdoor applications?

Yes, provided they are not exposed to extreme environmental conditions that may cause corrosion.

What should I do if the throughbolt is difficult to insert?

Make sure the hole is clean and of the correct diameter. Ensure there are no obstructions and try again with even force.

How can I prevent thread damage during installation?

The drive-in pin is designed to protect the thread. Ensure it is in place before hammering.

Where can I find the load-bearing capacity information?

The load-bearing capacity information will be available in the product specifications or on the packaging.

Troubleshooting

Throughbolt won't fully insert.

Ensure the hole is of the correct diameter and depth. Check for obstructions in the hole. Use a suitable hammer and apply even force during installation.

Fixing feels loose after installation.

Verify that the recommended torque was applied. Check the concrete for cracks or damage, as this could affect the fixing's performance. Replace the fixing if necessary.

Thread damage during installation.

Ensure the drive-in pin protects the thread. If damage occurs, replace the throughbolt with a new one.

Pros and Cons

Pros

  • Versatile installation methods (pre-positioned and push-through).
  • High load-bearing capacity.
  • Easy and simple installation process.
  • Protects threads during installation.
  • Pre-assembled for convenience.
  • Cost-effective with ETA approval.

Cons

  • Specific to non-cracked concrete; not suitable for all materials.
  • Requires a hammer for installation.
  • May require professional knowledge for optimal load calculations.
  • Size limitations based on the 10 x 176mm dimensions.

Setup, Compatibility & Care

Setup

  1. Preparation: Drill a hole of the correct diameter and depth in the concrete. Refer to the product specifications for exact dimensions.
  2. Insertion: Insert the FXA Throughbolt into the drilled hole, ensuring the fixture is aligned correctly.
  3. Installation: Using a hammer, drive the throughbolt until it is flush with the surface.
  4. Tightening: Tighten the nut to the recommended torque specification (check the product specifications) to ensure secure fastening.

Compatibility

  • Concrete: Specifically designed for use in non-cracked concrete.
  • Fixtures: Compatible with various fixtures, including steel components, machinery, and equipment, provided the load requirements are met.
  • Tools: Requires a hammer and a wrench for installation.

Care

  • Inspection: Regularly inspect the fixings for any signs of corrosion or damage.
  • Load Limits: Ensure that the applied loads do not exceed the specified load-bearing capacity.
  • Environment: Protect fixings from excessive moisture or corrosive environments to prolong their lifespan.

Similar items

Fischer FXA Throughbolt - SilverFrom £14Fischer FXA Throughbolt - 12 x 146mm - Silver - 523141From £22BaByliss Pro Cordless Tong - BlackFrom £24Wahl Hot Brush - 26mm - BlackFrom £14Hozelock Universal Flow Controller - 1758From £11GoodHome Clip Bay Bend - Grey - StripedFrom £9mdlondon Wave Heated Barrel Brush Multi Styler - Casal BlueFrom £129Equine America Uls-Gard Gel - 80mlFrom £12Montane Softflask Short Straw - MontaneFrom £10Milwaukee Chuck Adaptor - SDS Max to SDS PlusFrom £66Diall M3 Pozidriv Countersunk Machine Screw & Nut - SilverFrom £5Hot Brush - BlackFrom £13

Price History

DatePrice
Visit shop