Bosch CYL-9 Ceramic Tile Drill Bit - 8 x 80mm

No, this bit is designed for non-impact drills only. Using it with the hammer function engaged can damage the bit and the tile.

This bit is suitable for soft to medium-hard ceramic tiles. It is not recommended for very hard porcelain tiles or tempered glass.

No, the CYL-9 Soft Ceramic Tile Drill Bit is designed for dry drilling without the need for lubrication, making it convenient and mess-free.

The bit should be used at low speeds. Refer to your drill's manual for specific low-speed settings, as optimal RPM can vary by drill model.

The lifespan of the drill bit depends on the material hardness, frequency of use, and drilling technique. It is designed for long life when used correctly within its intended application.

Yes, this bit can be used for drilling into non-tempered glass.

The flute-less design is optimized for drilling into tile materials, allowing for efficient material removal without the clogging that can occur with traditional fluted bits in dusty applications.

Ensure the drill is set to a low speed and the non-impact function is engaged. Check that the drill bit is securely tightened in the chuck. Verify that you are drilling into a compatible material (soft to medium-hard ceramic tile or non-tempered glass).

Reduce drilling pressure and ensure you are using a low speed. Consider using a piece of painter's tape over the drilling area to help reduce chipping. Ensure the drill bit is sharp and not excessively worn.

You may be drilling too fast or applying too much pressure. Reduce speed and pressure. Allow the bit to cool down if necessary. For longer drilling tasks, consider taking short breaks.