Universal Masonry Drill Bit - (Dia)8mm (L)400mm

This drill bit is designed for use in masonry materials such as brick, concrete, and stone.

You should use a hammer drill when working with this bit to ensure effective drilling into masonry.

The drill bit is 400mm long. However, the usable depth depends on the project and the material you are drilling into. Always consider the length of your anchor when making your hole.

Drill at a moderate speed and apply even pressure. If the bit gets too hot, take a break to let it cool down.

Clean the bit after each use to remove debris. Store it in a dry place to prevent rust. Inspect for damage before each use.

If the bit breaks, cease using it immediately and replace it with a new one.

This drill bit is specifically designed for masonry. It is not recommended for use on metal or wood.

Check the drill's settings, ensuring it's in hammer mode for masonry. Verify the bit is sharp and not damaged. Apply firm, even pressure.

Reduce pressure and try drilling at a slower speed. Clear any debris from the hole. Consider using a different bit.

Ensure proper speed and pressure are used. Avoid overheating the bit by taking breaks if needed. Inspect the bit for damage.