Draper Cupped Nailset - 2.5 X 100Mm

The cupped face is designed to center the tool on the nail head, providing a more stable and positive driving action, which reduces the chance of slipping and damaging the surrounding material.

With a tip width of 2.5mm, it is best suited for finishing nails, brads, and other smaller fasteners commonly used in fine woodworking and trim applications.

While primarily designed for wood, it can be used on softer metal surfaces for sinking small metal fasteners, provided the material can accept a nail.

It is manufactured from carbon steel that has been hardened and tempered for durability and longevity.

Always dry the nailset thoroughly after use and store it in a dry location. A light application of oil can help protect it from rust, especially in humid environments.

No, this product is intended for adult use only and must not be sold to persons under the age of 18 due to the potential for injury when used with a hammer.

The nailset has a total length of 100mm (approximately 4 inches).

Ensure the cupped face is correctly positioned on the nail head. Check that you are using sufficient hammer force and striking squarely on the head of the nailset. Verify the nail is suitable for the material and not bent.

Ensure the cupped face is properly seated on the nail head before striking. Use controlled hammer blows rather than excessive force. Practice on scrap material to get a feel for the tool.

The cupped face is designed to prevent this, but ensure you are aligning the tool precisely. A firm, steady strike is more effective than a glancing blow. Make sure the nail is adequately seated in the material.

Wipe the tool dry after use and store it in a dry environment. If rust appears, lightly scrub with fine steel wool and apply a thin coat of oil to prevent recurrence.