Brabantia Ground Spike - 45mm

This ground spike is specifically designed for Brabantia Topspinner and Lift-O-Matic rotary airers with a 45mm pole diameter.

No additional tools are needed. You can push it into the ground by hand, although a rubber mallet may be helpful for harder ground.

Yes, it is made of galvanised steel plate, which is corrosion-resistant.

No, this ground spike is designed for use in soil. It is not suitable for concrete or paved surfaces.

Wipe it down with a damp cloth to remove dirt and debris. Make sure the cap is closed when not in use.

The closure cap keeps the anchor clean when the rotary airer is not in use, protecting it from dirt and debris.

Try moistening the soil to make it softer. If the ground is still too hard, relocate the spike to a different area with softer soil.

Insert the ground spike fully into the ground, ensuring it is secure and stable. The depth will depend on the ground conditions.

Ensure the ground is not too hard or rocky. If needed, moisten the soil beforehand to make insertion easier. You may also use a rubber mallet to gently tap the spike into the ground.

Make sure the ground spike is fully inserted and secure. Check that the ground is level. If the issue persists, try relocating the ground spike to a more stable area.

Check for any obstructions or debris in the cap or around the opening. Clean the area and try again. Ensure the spike is not bent.