Best current price£2.16from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£2.16Visit shop PJP 6012-PRO-N Professional Miniature Probe Hook Black
Visit shop15 offers from £2.16 - £4.14
View price history by clicking the chart icon.
This guide is for electronics technicians and hobbyists requiring precise circuit testing. The PJP Miniature Probe Hook (White, MPN: 6012-PRO-Bc) offers professional-quality access for measurements up to 70V and 2A. A key benefit is its compact design for tight spaces, though its solder termination requires soldering for connection. It features a durable build and clear voltage/current ratings.
| Model Part Number | 6012-PRO-Bc |
|---|---|
| Brand | PJP |
The PJP Miniature Probe Hook (White) is rated for a maximum voltage of 70V.
This probe hook is rated for a maximum current of 2A.
The probe hook has a solder termination. You will need to strip a wire and solder it to this termination for a permanent connection.
Yes, as long as the oscilloscope's input specifications (voltage and impedance) are compatible with the circuit you are testing and do not exceed the probe's ratings.
The diameter of the probe hook is 11mm.
No, with a rating of 70V and 2A, it is designed for low-voltage and low-to-moderate current applications, not high-power systems.
This specific model is white. Other colors available include yellow, black, red, and blue.
Ensure the probe hook is securely soldered to the test wire and that the wire is properly connected to your multimeter. Check that the multimeter is set to the correct function (e.g., Volts DC, Amps DC) and range. Verify the circuit being tested has power and is functioning.
Check the solder joint for integrity. A poor solder connection is the most common cause of intermittent readings. Ensure the probe tip is making good contact with the test point and is not touching adjacent components.
The wire may not be adequately soldered to the termination. Re-solder the wire, ensuring a strong bond. If the plastic housing is damaged, the probe may need replacement.
Setup: To use the probe hook, strip a small amount of insulation from a suitable wire. Thread the wire through the solder termination point on the probe hook. Secure the connection by soldering the wire to the termination. Ensure a clean and solid solder joint. The probe hook is designed to connect to standard multimeter test leads or other measurement equipment via the soldered wire.
Compatibility: This probe hook is compatible with any standard test equipment that accepts a wired connection, such as multimeters, oscilloscopes, and logic analyzers, provided the voltage and current ratings are not exceeded. It is designed for use with circuits operating within its specified 70V and 2A limits.
Care: Keep the probe tip clean and free from debris. After use, clean the probe hook with a dry or slightly damp cloth. Avoid using harsh chemicals or solvents, as they may damage the plastic housing or the metal probe. Store in a dry environment to prevent corrosion.
