Spigen NeoFlex Screen Protector - Galaxy S23 Ultra - 2 Pack

The Neo Flex film is made of highly flexible and durable Polyethylene terephthalate (PET) or Thermoplastic Polyurethane (TPU).

Each package contains 2 Spigen Neo Flex films.

The Neo Flex is designed to maintain touch sensitivity and should not significantly interfere with fingerprint recognition. However, ensure the sensor area is clean and the protector is applied smoothly.

Yes, the wet application method allows for repositioning during initial installation. Once fully adhered, repeated removal and reapplication can be difficult and may compromise the protector's integrity.

Minor scratches and scuffs can disappear over a period of 24-72 hours, depending on the severity of the scratch and environmental conditions.

Yes, the Neo Flex is designed to be fingerprint resistant, helping to keep the screen looking cleaner.

The protector dimensions are approximately 158.2 mm x 73.7 mm, designed to fit the Galaxy S23 Ultra's screen size.

Gently lift the edge of the protector nearest to the bubble and reapply, using the squeegee to push out air and moisture. For stubborn bubbles, allow 24-48 hours for them to dissipate naturally as the film adheres.

Use the wet application method to your advantage; the moisture allows you to reposition the film. Carefully align the cutouts and edges before squeegeeing out the liquid.

Ensure the protector is fully adhered to the screen with no trapped air or moisture underneath. You may need to re-apply or check for debris under the film. Also, check your phone's touch sensitivity settings.

This can sometimes happen if a very tight-fitting case is used or if the edges were not properly sealed during installation. Ensure the case does not interfere with the protector. Reapply if necessary, ensuring the edges are smooth.