Aurora Utilite CS Round LED Bulkhead - White

The Aurora Utilite CS Round LED Bulkhead has an IP65 rating, meaning it is dust-tight and protected against low-pressure water jets from any direction.

Yes, the colour temperature can be changed by accessing the switch on the fitting, usually before fully securing the diffuser. Power must be off during adjustment.

An IK06 rating indicates that the luminaire is protected against 1 Joule of impact energy, equivalent to the impact of a 500g mass dropped from a height of 200mm. This signifies moderate resistance to physical impact.

The bulkhead is designed to operate effectively in ambient temperatures ranging from -20°C to +40°C.

Yes, with its IP65 rating, it is suitable for damp and wet locations and can withstand direct exposure to water jets.

Yes, this model is available in various wattages including 8W, 15W, 20W, and 30W to suit different lighting requirements.

The diffuser is made of durable polycarbonate.

Verify that the power supply is switched on at the mains. Check all wiring connections to ensure they are secure. Confirm the circuit breaker or fuse is not tripped or blown.

Inspect wiring connections for looseness. Ensure the fixture is securely mounted. If the issue persists, the LED module may need replacement.

Turn off power to the unit. Re-open the diffuser and check the colour temperature selection switch. Ensure it is firmly set to the desired position (3000K, 4000K, or 6500K) and re-seal the diffuser.

Clean the polycarbonate diffuser and body. Check for any obstructions or dirt accumulation. Ensure the ambient temperature is within the specified operating range.