Rangemaster Chimney Cooker Hood - Silver

Ducted installation vents cooking fumes and steam directly outside your home via ducting. Recirculating installation filters the air and releases it back into the kitchen, requiring carbon filters to remove odours.

The metal grease filters should be cleaned regularly, ideally after every few uses or at least once a month, depending on your cooking habits. Carbon filters for recirculating mode typically need replacement every 3-6 months.

The maximum extraction rate is 610 m³/h, with a boost mode reaching 710 m³/h.

Yes, this cooker hood is suitable for use with most standard hob types. Ensure it is installed at the recommended height above your hob.

It uses two 1W LED bulbs, providing efficient and bright illumination over the cooking area.

The cooker hood measures 900 mm in width, 450 mm in depth, and its height is adjustable between 600 mm and 1060 mm.

Yes, the stainless steel finish can be easily maintained by wiping with a soft, damp cloth. Avoid abrasive cleaners to prevent scratches.

Check that the cooker hood is properly plugged into a working power outlet. Ensure the circuit breaker is not tripped.

Clean or replace the grease filters. If used in recirculating mode, check and replace the carbon filters. Ensure there are no obstructions in the ducting (if applicable).

Verify that all filters are correctly installed and secure. Check for any loose parts or obstructions. Ensure the hood is securely mounted to the wall.

Check the LED bulb connections. If a bulb is faulty, replace it with a new 1W LED bulb of the correct specification.