Best current price£9.99from Amazon
Shopping.co.uk recommended and popular offers
Amazon£9.99Visit shop Galvanox Black Battery Voltage Tester Designed For Leatherman Multitools (Flat-Bit Slot Accessory) Dc Voltage Meter, 2.5Vdc To 30Vdc
Visit shop2 offers from £9.99 - £14.10
View price history by clicking the chart icon.
This GALVANOX Battery Voltage Tester (VBLM109) is designed for DIY enthusiasts, technicians, and anyone needing to quickly assess battery health, especially those working with electronics or tools. Its primary benefit is providing instant, portable DC voltage readings directly from your Leatherman multitool's bit holder, with a simple color-coded LED indicator. A key caveat is its inability to test standard 1.5V AA or AAA batteries, focusing instead on higher voltage DC sources.
| Model Part Number | VBLM109 |
|---|---|
| Brand | GALVANOX |
The GALVANOX Battery Voltage Tester can accurately read DC voltages ranging from 2.5VDC to 30VDC.
No, this tester is not designed for 1.5V batteries like AA or AAA. It is intended for higher voltage DC sources.
The tester uses color-coded blinks: Green indicates every 10V, Yellow indicates every 1V, and Red indicates every 0.1V. For example, multiple green blinks followed by yellow and red would indicate a specific voltage within the range.
No, the device does not require an additional battery. It draws power from the circuit being tested.
Yes, while designed to integrate with Leatherman tools, it can be used to test any conductive material or DC voltage source within its specified range, with or without a multitool.
Always use at your own risk. Wear protective gear, especially when testing large capacity batteries. Do not use the voltage meter when wet.
Wipe the tester with a dry or slightly damp cloth. Avoid using liquids or harsh chemicals, and ensure it is completely dry before use or storage.
Ensure both the tester and the battery terminals are clean and making good contact. Verify the battery has voltage within the 2.5V to 30V DC range. Check that the circuit is complete by touching both positive and negative points.
This may indicate a weak or unstable battery charge. Try testing a different, known-good battery to see if the issue persists. Ensure a firm connection.
Review the color-coded blink guide: Green for every 10V, Yellow for every 1V, and Red for every 0.1V. Test against a known voltage source if possible to calibrate your understanding of the readings.
Setup: Insert the flat end of the voltage tester into the flat bit receiver of your Leatherman multitool. For standalone use, hold the flat bit end and touch the other end of the tester to the positive terminal of the battery or conductive surface you wish to test. Simultaneously, touch the negative terminal with the appropriate end of the tester to complete the circuit.
Compatibility: This tester is designed to fit the standard flat bit holder found on many Leatherman multitools. It is compatible with any conductive material and DC power sources within the 2.5V to 30V range. *It is not compatible with AA or AAA batteries (1.5V).*
Care: Keep the device dry and clean. Wipe with a dry or slightly damp cloth as needed. Avoid exposing it to moisture or harsh chemicals. Store in a dry place when not in use, preferably in its designated spot on your multitool or on a keychain.
