Best current price£55.00from Homebase
Shopping.co.uk recommended and popular offers
Homebase£55.00Visit shop Homcom Silver Ceramic Heater 2200W
Visit shop
Debenhams£62.05Visit shop Homcom Unisex Silver 2200W Ceramic Heater For Home With Remote Control, 12H Timer, Size 10
Visit shop9 offers from £55.00 - £87.98
View price history by clicking the chart icon.
The HOMCOM 2200W Ceramic Heater offers efficient and customizable warmth for your living space, making it ideal for targeted heating in rooms up to a moderate size. Its key advantage lies in its flexible temperature and power settings, coupled with convenient remote control and oscillation for even heat distribution. Be mindful that as a powerful space heater, it requires a suitable power outlet and should be used with appropriate safety precautions.
| Model Part Number | 2200W |
|---|---|
| Brand | HOMCOM |
PTC stands for Positive Temperature Coefficient. PTC ceramic heaters use ceramic stones as a heating element. They are known for their efficiency, quick heat-up time, and self-regulating safety features, meaning they won't overheat as easily as traditional coil heaters.
No, this heater is not rated for use in wet or damp environments like bathrooms. Exposure to water can create a serious safety hazard. Always use it in dry indoor locations.
On its highest setting, the heater consumes 2200W (2.2 kilowatts) per hour. On the lower heat setting, it uses 1100W (1.1 kilowatts) per hour. The fan-only mode uses minimal power. Your electricity bill will depend on your local electricity rates and how long you operate the heater.
Info needed: The product description does not specify an exact square footage for the heating area. Generally, a 2200W heater is suitable for small to medium-sized rooms, approximately 15-25 square meters (160-270 square feet), depending on insulation and ceiling height.
Info needed: The product description does not explicitly state the inclusion of a tip-over safety switch or overheat protection. For specific safety features, please refer to the product manual or contact HOMCOM customer support directly.
Press the 'Timer' button on the control panel or remote. Each press typically increases the timer by one hour, up to 12 hours. The display will show the set duration. The heater will automatically turn off after the set time expires.
Ensure the power cord is securely plugged into a working electrical outlet. Check if the power switch on the unit (if any) is in the 'On' position. Verify your household circuit breaker hasn't tripped.
Check if the heater is set to the 'Fan-only' mode. Switch to 1100W or 2200W heating mode. Ensure the set temperature (10-35℃) is higher than the current room temperature.
Check and replace the batteries in the remote control. Ensure there are no obstructions between the remote and the heater's sensor. Point the remote directly at the heater's LED screen.
Verify that the oscillation button has been pressed. If the heater is on an uneven surface, adjust its position. If the issue persists, power off the unit, unplug it, wait a few minutes, then plug it back in and try again.
This HOMCOM heater is designed for use with standard electrical outlets suitable for a 2200W appliance. It is compatible with most indoor residential and office environments. Do not use in wet or damp locations such as bathrooms or laundry rooms where it could come into contact with water.
