Timco Cabin Hooks - Hot Dipped Galvanised - 3"

This cabin hook is made from cast iron for maximum strength and durability.

No, fixings (screws) are not included with this product and must be purchased separately. The recommended screw diameter is 4.0mm (8-gauge imperial).

It has a Corrosion Rating of 4, making it suitable for urban and industrial areas with a moderate salt atmosphere.

The bar length is 75mm (approximately 3 inches).

While it is designed for heavy domestic applications, its 3-inch size is best suited for medium-weight doors and gates. For extremely heavy gates, a larger or more heavy-duty hook might be more appropriate.

The product is rated for 'Urban & industrial areas with a moderate salt atmosphere'. For highly corrosive coastal environments, additional protective measures or a different product may be necessary.

Clean the hook with a damp cloth. Avoid abrasive cleaners. A light application of oil can help maintain the mechanism's smoothness.

Clean any debris from the hook and eyelet. Apply a small amount of lubricant to the pivot point. Ensure screws are not overtightened, causing misalignment.

Check that the correct type and length of fixings were used. Ensure they are securely fastened into a solid mounting surface. The door or gate might be too heavy for this size hook; consider a larger option.

This is unusual for a hot dipped galvanised product in urban/industrial areas. Clean the rust gently with a wire brush and apply a rust-inhibiting paint or a clear protective coating to the affected area.