Best current price£16.99from eBay
Shopping.co.uk recommended and popular offers
eBay£16.99Visit shop 4x Bartoline Ready Mix Exterior Filler Shrink Crack Resistant White Finish 330g
Visit shop
B&Q£22.49Visit shop B&Q - 4X Ready Mix Exterior Filler Shrink Crack Resistant White Finish 330G
Visit shop3 offers from £16.99 - £24.99
View price history by clicking the chart icon.
The Bartoline Ready Mix Exterior Filler is an ideal solution for DIY enthusiasts and homeowners needing to repair cracks, holes, and gaps in masonry, brick, stone, and wood. This product offers excellent adhesive properties and convenience by arriving pre-mixed, though users must be mindful that it requires protection from rain and should not be used on surfaces constantly submerged in water.
| Model Part Number | RM0737 |
|---|---|
| Brand | Bartoline |
While designed for exteriors, it can be used indoors; however, ensure adequate ventilation during application.
Yes, for long-lasting protection against weather, the repair must be sealed with an oil-based paint or varnish.
No, do not apply the product in temperatures below 5°C as it will not cure correctly.
It is water-resistant once cured and sealed, but it is not suitable for surfaces that are regularly under water.
Brush out all loose material and ensure the surface is clean, dry, and dust-free before application.
You should apply layers no more than 6mm thick to ensure proper setting.
Ensure the application temperature is above 5°C and the area is shielded from direct rain or moisture.
You may have applied a layer thicker than 6mm. Apply in thinner, successive layers, allowing each to set fully in between.
Check that the surface was free of dust and loose debris before application. Re-clean the area and ensure it is dry before re-applying.
Before starting, ensure the substrate is clean, dry, and free of loose material. For absorbent surfaces like porous stone or brick, lightly moisten the area first to prevent the filler from drying out too quickly. If covering nail heads, use an oil-based paint first to prevent rust bleed-through. After application, the filled area must be protected from rain until it is fully set and sealed with an appropriate exterior-grade oil-based paint or varnish. Keep the product stored in a cool, dry place and ensure the cap is securely replaced to prevent the remainder of the tube from hardening.
