Fibre Box Tap - BLAKE UK - BFT-SCA-10_90
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This BLAKE UK Fibre Box Tap (Model BFT-SCA-10_90) is designed for professionals in fibre optic networks who need to precisely split optical signals. Its key benefit is efficiently dividing signals into a 90%/10% ratio, minimizing losses and maximizing network effectiveness, though it is specifically designed for this ratio and not variable splitting. It features SCAPC connections for superior signal transmission and is built for robustness and precision in various network deployments.
All features
| Model Part Number | BFT-SCA-10_90 |
|---|---|
| Brand | BLAKE UK |
Extended Product Information
FAQs
What is the primary function of this Fibre Box Tap?
The primary function is to divide an incoming fibre optic signal into two outputs with a fixed ratio of approximately 90% to one output and 10% to the other.
What type of connectors does this tap use?
This tap uses SCAPC (Subscriber Connector - Angled Physical Contact) connectors.
Can this tap be used for splitting signals into equal parts?
No, this tap is specifically designed for an unequal split of 90% to one output and 10% to the other. It cannot be used for equal splitting.
What type of fibre optic cable is compatible with this tap?
This tap is designed for use with single-mode fibre optic cables and requires SCAPC connectors for a proper connection.
How does SCAPC connection benefit signal transmission?
SCAPC connectors offer low return loss and superior signal transmission due to their angled polish, which minimizes reflections back into the fibre core.
Is this tap suitable for outdoor network installations?
The product description mentions durability in various environmental conditions, suggesting suitability for network infrastructure, but specific environmental ratings should be consulted for direct outdoor exposure details.
What happens if I connect the cables to the wrong ports?
Connecting cables to the wrong ports can result in no signal, significantly weakened signals, or improper signal distribution. Always ensure the input signal is connected to the main input port and outputs are used as intended for the 90%/10% split.
Troubleshooting
No signal at output ports
Verify that the input fibre optic cable is properly connected and transmitting a signal. Check both output connections for secure seating. Ensure the tap is oriented correctly for signal flow.
Signal level too low at primary output
Confirm that the signal split ratio is appropriate for the application. Check for excessive loss in the input cable or at the input connector. Ensure the tap is not damaged.
Intermittent signal drops
Inspect all SCAPC connectors for dirt or damage. Clean connectors if necessary. Ensure cables are not bent sharply or stressed.
Mismatch in expected 90%/10% split
This device has a fixed split. If a different ratio is required, a different tap or splitter configuration will be needed. Verify input signal strength and output measurements with calibrated equipment.
Pros and Cons
Pros
- Efficiently divides signals into a precise 90%/10% ratio.
- Minimizes signal loss, preserving signal integrity.
- Features high-quality SCAPC connectors for reliable transmission.
- Durable construction ensures longevity in network environments.
- A dependable solution for upgrading or deploying new fibre networks.
Cons
- Fixed 90%/10% split ratio; not suitable for variable splitting needs.
- Requires specific SCAPC connectors for compatible connections.
- Primarily designed for fibre optic networks, not other signal types.
Setup, Compatibility & Care
Setup:
- Ensure the environment is clean and free of dust before handling fibre optic components.
- Connect incoming and outgoing fibre optic cables using the SCAPC connectors. Ensure a secure and proper click-lock mechanism engagement.
- Verify correct port usage: the input port receives the main signal, one output port receives approximately 90% of the signal, and the other receives approximately 10%.
Compatibility:
- This Fibre Box Tap is designed for use with single-mode fibre optic networks.
- It requires cables terminated with SCAPC connectors for optimal performance and connection.
- Compatible with standard fibre optic network architectures that require signal splitting.
Care:
- Keep connector end-faces clean at all times. Use appropriate fibre optic cleaning tools (e.g., lint-free wipes, cleaning swabs) if necessary.
- Avoid direct exposure to moisture and extreme temperatures unless the unit is rated for such conditions.
- Regularly inspect connections for physical damage or contamination.