Greenhouse Guttering Downpipe Fixings Kit - Woodside - 35mm

These fixings are designed for 35mm diameter greenhouse guttering and downpipes.

Yes, they are compatible with other greenhouse guttering systems that use a 35mm specification.

Each pack includes end caps, drain pipe connectors, and clips necessary for securing your guttering system.

You can clean them using a damp cloth to remove dirt and debris. Avoid abrasive cleaners.

These fixings are specifically designed for greenhouse guttering systems and may not be suitable for standard domestic home guttering, which often has different dimensions.

They help maintain efficient water flow from your greenhouse gutters to a water butt or drainage, aiding in rainwater harvesting and preventing water overflow around the greenhouse.

It is advisable to check them periodically, especially after periods of harsh weather, for any signs of damage or wear.

Ensure the provided clips are correctly positioned and tightened around the downpipe. Check that the connector piece is fully seated within the guttering outlet.

Verify that the 35mm connector is fully inserted and creating a watertight seal. Ensure the downpipe is correctly aligned and any seals are intact. For a more permanent solution, consider using appropriate waterproof sealant if needed.

Confirm that both your guttering and downpipe are indeed 35mm in diameter. Ensure there are no obstructions or deformities in the existing guttering or downpipe that prevent a proper fit.

Check for blockages within the guttering, the downpipe, or the downpipe fixings themselves. Ensure the downpipe is not kinked or crushed, and that it is angled correctly towards the water butt.