Setup, Compatibility & Care
To install, power off your pool or spa pump system and release the pressure from the filter housing. Unscrew the housing lid, remove the old cartridge, and clean the canister interior of any loose debris. Insert the PRB17.5SF cartridge, ensuring it is seated correctly over the center pipe.
Technical Specifications:
- Top/Bottom Diameter: 5 inches (127mm)
- Length: 4 5/8 inches (117mm)
- Top/Bottom Hole: 2 1/8 inches (54mm)
- Surface Area: 17.5 Sq. Feet
For care, use a gentle stream of water to clean the pleats. Do not use high-pressure washers, as these can damage the trilobal fabric. If the filter becomes saturated with body oils or lotions, use a dedicated filter cleaning solution before rinsing.