Warmlite Electric Fire - 2KW

The Warmlite Electric Fire offers two heat settings: 1000W for a lower heat output and 2000W for maximum warmth.

Yes, you can operate the realistic flame and coals effect independently of the heat function, allowing you to enjoy the ambiance year-round.

Yes, a remote control is included for convenient adjustment of settings from a distance.

This electric fire requires an inset/chimney space of approximately 59.5H x 48.3D x 10.8D cm for flush fitting.

To clean the unit, ensure it is unplugged and cool. Use a soft, damp cloth to wipe the surfaces. Avoid using abrasive cleaners or chemical solvents.

Yes, for your peace of mind, the unit is equipped with a safety thermal cut-off feature that automatically switches it off if it overheats.

The Warmlite Electric Fire features a programmable timer allowing you to set specific on/off times. Please refer to your user manual for detailed programming instructions.

Ensure the electric fire is securely plugged into a functioning power outlet. Check that the power switch is in the 'ON' position and verify that a heat setting (1000W or 2000W) has been selected. Adjust the thermostat to a higher setting than the ambient room temperature.

Check that the unit is powered on. Use the remote control or manual buttons to adjust the flame brightness setting. Ensure no obstructions are blocking the flame effect projection area.

The safety thermal cut-off may have been activated due to overheating. Unplug the unit, allow it to cool for at least 15-20 minutes, and check for any obstructions around the air inlets or outlets. Clear any blockages before plugging it back in and restarting. Ensure adequate ventilation around the unit.