Best current price£13.59from eBay
Shopping.co.uk recommended and popular offers
eBay£13.59Visit shop 2x Bartoline Ready Mixed Fine Surface Filler Repair Small Holes Dents Nicks 300g
Visit shop
B&Q£15.29Visit shop B&Q - 2X Ready Mixed Fine Surface Filler Repair Small Holes Dents Nicks 300G
Visit shop3 offers from £13.59 - £15.29
View price history by clicking the chart icon.
This Bartoline Ready Mixed Fine Surface Filler in white is ideal for DIY enthusiasts and professionals tackling minor interior surface repairs. Its key benefit is providing a super smooth, strong finish for small holes, dents, and nicks with excellent adhesion. A potential caveat is that for deeper repairs, multiple thin layers or a different filler might be necessary.
| Colour | White |
|---|---|
| Model Part Number | RM0371 |
| Brand | Bartoline |
No, this Bartoline Fine Surface Filler is specifically designed for interior surfaces only.
This filler is best for small holes, dents, and nicks. For deeper repairs, it's recommended to apply in thin layers or use a dedicated deep-fill product.
Drying times can vary depending on application thickness and environmental conditions, but it is designed to be quick-drying for subsequent finishing steps.
Yes, once the filler is completely dry, it provides a paintable surface.
For minor imperfections, minimal sanding may be required. For a perfectly flush finish, it is often beneficial to slightly overfill and then sand the repair area smooth.
Store the filler in a cool, dry place with the cap securely fitted to prevent it from drying out.
Work the tube thoroughly between your fingers before cutting the nozzle. Ensure it has not been stored in very cold conditions.
Apply the filler in multiple thin layers, allowing each to dry completely before adding the next. Avoid applying too much in a single thick layer.
Apply the filler thinly with a filling tool or trowel. For a perfect finish, overfill slightly and then sand smooth once fully cured.
Ensure the surface is completely clean, dry, and free from dust, grease, or loose paint before application. Re-seal rust-prone elements like nail heads.
Preparation: Before use, ensure the tube is worked well between your fingers. The surface to be filled must be clean, dry, and free from dust. For any exposed nail or screw heads, apply an oil-based paint to prevent rust from appearing through the filler.
Application: Remove the cap and cut the tip of the nozzle at a 45° angle. Gently squeeze the product into the area requiring filling. Use a filling tool or trowel to press the filler into any cavities. If a deeper repair is needed, apply in thinner layers, or use a coarser filler first. For a perfect finish, fill slightly proud of the surrounding surface, allowing it to be sanded down once dry.
Compatibility: Suitable for a wide range of imperfect interior surfaces. Ensure compatibility with your specific surface material before application.
Care: Store the filler in a cool, dry place, and ensure the cap is securely replaced after use. Unused filler should be stored upright.
