Antex Soldering Iron Tip - 4.7mm - 104
Best current price£6.98from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£6.98Visit shop 4.7mm replacement tip for Antex C15 & M12,TC25 soldering irons 104 bit (B010460)
Visit shopeBay£6.98Visit shop All Offers
2 offers from £6.98 - £9.29
View price history by clicking the chart icon.
eBay4.7mm replacement tip for Antex C15 & M12,TC25 soldering irons 104 bit (B010460)
£2.00 delivery
£6.98
Visit shop
B010460 4.7mm No.104 Sloped Conical Plated Soldering Iron Tip AntexFree delivery in 1–3 days£9.29Visit shop →
Product Information
Full details
The Antex 104 4.7mm sloped soldering tip is an essential replacement accessory for professionals and hobbyists using Antex C15, M12, or TC25 soldering irons. It excels at delivering consistent heat for precise soldering applications, especially when working with modern lead-free solder alloys. While it offers superior durability thanks to its iron and nickel plating, users must ensure compatibility with their specific iron model before installation to avoid poor heat transfer or improper fit.
All features
| Model Part Number | 104 |
|---|---|
| Brand | Antex |
Extended Product Information
FAQs
Can I use this tip with other Antex models?
No, this tip is specifically designed for the C15, M12, and TC25 series. Check your iron's documentation for compatibility.
Is this tip suitable for leaded solder?
Yes, while optimized for lead-free solder, it performs perfectly with traditional leaded solder alloys.
How often should I replace the tip?
Replace the tip when you notice pitting on the surface or when the tip fails to hold solder even after cleaning.
Should I file the tip if it gets dirty?
Never file the tip. Filing removes the protective plating and will lead to rapid degradation of the copper core.
Why does the tip look silver?
The tip is finished with an iron and nickel plating, which gives it a silvery appearance and provides corrosion resistance.
Troubleshooting
Tip is not heating properly
Ensure the tip is fully seated on the heating element and that the retention screw or nut is tightened correctly.
Solder is not sticking to the tip
The tip may be oxidized; use a brass wire cleaner or a tip tinner/activator to restore the wetting surface.
Pros and Cons
Pros
- High-grade nickel plating prevents premature tip oxidation
- Pre-tinned surface ensures excellent solder flow from first use
- Excellent thermal conductivity due to pure copper core
- Specifically calibrated for the requirements of lead-free solder
Cons
- Compatible only with specific Antex C15, M12, and TC25 models
- Sloped profile may not be suitable for extremely fine SMD work compared to needle tips
- Replacement requires a cool iron to ensure safety
Setup, Compatibility & Care
To replace your tip, ensure the soldering iron is completely cool. Carefully remove the existing tip from the heating element and slide the 104 tip into place until it is fully seated. For maintenance, avoid using files or abrasive materials, as these will strip the protective iron and nickel plating and ruin the tip. Instead, use a damp cellulose sponge or a brass wire tip cleaner to remove residual solder while the iron is hot. If the iron will remain idle for an extended period, apply a fresh layer of solder to the tip to protect it from oxidation while stored.