Best current price£154.04from PCHUB.UK
Shopping.co.uk recommended and popular offers
PCHUB.UK£154.04Visit shop Tp-Link Black Jetstream Tl-Sl2428p Network Switch Managed L2 Fast Ethernet (
Visit shop12 offers from £154.04 - £269.13
View price history by clicking the chart icon.
The TP-Link JetStream TL-SL2428P is a managed Layer 2 PoE switch designed for small to medium businesses seeking a cost-effective network solution. It offers 24 Fast Ethernet PoE ports with a substantial 180W PoE budget, enabling flexible deployment of devices like access points and IP cameras, alongside 4 Gigabit ports and 2 SFP combo slots for expansion. While it provides robust features like QoS, VLANs, and strong security, its 10/100Mbps PoE ports might be a bottleneck for high-speed network backbones. This guide will help you understand and leverage its capabilities.
| Series | JetStream |
|---|---|
| Model Part Number | TL-SL2428P |
| Brand | TP-Link |
The TP-Link JetStream TL-SL2428P has a total PoE power budget of 180W, which is shared across its 24 PoE-enabled ports.
No, the basic switching RJ-45 Ethernet ports are 10/100Mbps Fast Ethernet. The two Gigabit combo SFP slots can support Gigabit speeds for uplinks, but the switch itself does not support 10Gbps connections.
This is a managed Layer 2 switch. It supports web-based management, SNMP (v1/v2c/v3), and RMON.
Typically, there is a reset button on the front or back panel. Press and hold this button for a specified duration (e.g., 10-15 seconds) while the switch is powered on. Refer to the user manual for the exact procedure.
VLANs allow you to segment your network into smaller, isolated broadcast domains. This enhances security, reduces network congestion, and improves performance by logically grouping devices.
The switch comes with an AC power cable. Ethernet cables for connecting devices to the ports are typically sold separately.
Yes, the switch features 2 combo SFP ports. Each combo port consists of an SFP slot and an RJ45 port. You can use either the SFP module or the RJ45 port for a given combo port, but not both simultaneously for the same port number.
Ensure the AC power cord is securely connected to both the switch and a working power outlet. Check the power outlet with another device.
Verify that Ethernet cables are properly connected at both ends and are not damaged. Check the link lights on the switch and the connected device. Ensure the connected device has a valid IP configuration.
Check for cable issues, interference, or excessive network traffic. Ensure QoS settings are not overly restrictive. Clean any air vents or fan grilles to ensure proper cooling. Consider upgrading firmware.
Confirm that the connected device is IEEE 802.3af/at compliant. Check the total PoE power consumption against the switch's 180W budget. Ensure the port is enabled for PoE and that no other high-power devices are saturating the budget.
Verify the switch is powered on and connected to the network. Ensure your management computer is on the same subnet as the switch's management IP address. Try resetting the switch to factory defaults if necessary (consult manual for procedure).
Setup:
Compatibility:
Care:
