Gripit Shelf Kit - Red

The kit includes the fixings, screws, and drill bit. You will likely need a drill and possibly a level to ensure the shelf is straight.

This kit is specifically designed for use on plasterboard walls.

The weight capacity depends on the plasterboard's thickness and condition. Always consider the weight of the shelf and the items you will be placing on it.

No, this kit is not designed for concrete walls. It is only for plasterboard.

If the hole is too big, the fixing may not grip securely. You might need to use a different fixing solution or relocate the shelf.

It is not recommended to reuse the fixings. They are designed for a single installation.

Using the correct screws is important. If the screw is too long, it could damage the wall behind the plasterboard. Use the screws provided with the kit.

Ensure the Gripit fixings are properly installed and tightened. Check if the screws are fully inserted into the fixings. If the plasterboard is damaged, the fixings may not hold properly. Consider using a different location or reinforcing the plasterboard.

Verify you are using the flat drill bit provided in the kit. Make sure the hole is the correct size for the Gripit fixings. If needed, re-drill the hole, ensuring the bit is centered and straight.

Ensure the hole is clean and free of debris before inserting the fixing. The plasterboard may be too thin or damaged to support the fixings. Check the condition of the plasterboard and consider relocating or using a different mounting method.