California Sunbounce Bounce Wall Reflector - Zebra Gold/Silver

Yes, this reflector is an interchangeable surface and requires the California Sunbounce Bounce Wall frame to function.

The Silver side provides a neutral, contrast-enhancing reflection. The Zebra Gold side adds warmth to the light, suitable for flattering skin tones.

While primarily designed for detachable flashes, it can be used with small, heat-managed continuous lights, provided they are aimed correctly at the reflector and do not generate excessive heat.

Use a soft, damp cloth for cleaning. Avoid harsh chemicals or abrasive materials that could damage the reflective surface.

Yes, its lightweight and durable design makes it suitable for on-location and outdoor shoots, but it should be secured against strong winds.

The Zebra Gold side warms the light source. Your camera's white balance setting will need to be adjusted accordingly, or you can correct it in post-processing for the desired effect.

The dimensions depend on the specific Bounce Wall frame size it is attached to, as the reflector is designed to fit the frame.

Ensure the reflector is properly secured to all attachment points on the Bounce Wall frame and that the frame itself is correctly assembled and tensioned.

Check that the reflector surface is clean and free from wrinkles. Ensure the Bounce Wall frame is providing adequate tension across the entire surface.

Reduce the intensity of the flash or move the Bounce Wall further away from the subject to lessen the warming effect. Alternatively, consider using the Silver side for a neutral reflection.

Soften the light by moving the Bounce Wall further from the subject or by using a less intense flash setting. You can also try using a diffusion material between the flash and the reflector if the system allows.