RØDE Procaster - Broadcast Dynamic Microphone

The RØDE Procaster is a dynamic microphone and does not require phantom power to operate. While it is designed to withstand phantom power, it is best practice not to supply it unless specifically required by your equipment.

Dynamic microphones like the Procaster are generally more robust, less sensitive to background noise, and do not require external power. Condenser microphones are more sensitive, capture more detail, and typically require phantom power.

Yes, the Procaster can be used for recording music, especially vocals where its clarity and plosive rejection are beneficial. However, its frequency response is tailored for speech, so EQ adjustments may be necessary to achieve a desired sound for musical instruments or singing.

The RØDE Procaster is covered by RØDE Microphones' industry-leading 10-year warranty.

The Procaster typically comes with a zip pouch and a 10-year warranty card. A mini XLR to XLR cable is also included for connection.

Use a soft, dry cloth to clean the exterior of the microphone. Avoid using liquids or abrasive cleaners, as they can damage the finish and internal components.

The microphone input impedance of the RØDE Procaster is 32 Ω.

Ensure the mini XLR to XLR cable is securely connected at both the microphone and the audio interface. Verify that your audio interface is powered on and has adequate input gain set. Check that the correct input channel is selected in your recording software.

Increase the input gain on your audio interface or mixer. Confirm you are using a quality XLR cable. Ensure the microphone is not being inadvertently masked by background noise that is being amplified.

Check if the input gain is too high, causing clipping. Ensure the microphone is not positioned too close to the sound source, especially for loud vocals. The internal pop filter should handle most plosives, but extreme proximity can still cause issues.

Try a different XLR cable. Ensure all audio equipment is properly grounded. Move the microphone and cables away from potential sources of electrical interference (e.g., power supplies, fluorescent lights).