Silverline Aluminium Oxide Sanding Roll - 120 Grit - 115mm - 10m

Use a sharp utility knife or scissors to cut the sanding roll to the desired length. Ensure a clean cut to avoid tearing.

While it can be used on some metals, it is primarily designed for wood and other dry sanding applications. For metal sanding, a different type of abrasive may be more suitable.

Grit selection depends on the material and the desired finish. Lower grits (e.g., 40-60) are for aggressive material removal, medium grits (e.g., 80-120) for smoothing, and higher grits (e.g., 180-240) for fine finishing.

Store the sanding roll in a dry place to prevent moisture absorption, which can degrade the abrasive. Avoid extreme temperatures.

Always wear eye protection and a dust mask or respirator to avoid inhaling dust particles. Work in a well-ventilated area.

Replace the sanding roll when it becomes clogged, dull, or worn. The lifespan depends on the material, sanding pressure, and frequency of use.

Yes, this sanding roll is compatible with random orbital sanders that accept 115mm wide rolls. Ensure the sander's pad is in good condition.

Reduce sanding pressure, or switch to a coarser grit if removing a large amount of material.

Ensure the sanding roll is properly secured. Check for any sharp edges on the workpiece that might be causing the damage.

Check if the grit is appropriate for the material, and that the sanding surface is flat.