Shopping.co.uk

Trend Snappy Flat Bit - 30mm - SNAP/FB/30

Trend Snappy Flat Bit - 30mm - SNAP/FB/30

The Trend Snappy 30mm flat bit is an economical and efficient solution for cutting holes in timber...

Best current price£4.52from Power Tools Direct

Best offers

Shopping.co.uk recommended and popular offers

All Offers

20 offers from £4.52 - £10.07

View price history by clicking the chart icon.

Power Tools DirectTrend Snappy Flat Bit 10Mm Pk 1 Snap/Fb/10
£7.95 delivery
£4.52
Visit shop
eBayTrend Snappy Flat Bit 16mm 150mm SNAP/FB/16 - 1/4"" HEX
£2.95 delivery
£5.00
Visit shop
Tooled UpTrend Snappy Flat Bit 10mm 150mm
£5.95 delivery
£5.95
Visit shop

Product Information

Full details

The Trend Snappy 30mm Flat Bit is designed for woodworkers and DIY enthusiasts who require an efficient, reliable solution for boring holes in timber. It excels in delivering clean entry and exit points thanks to its precision-engineered geometry, making it ideal for cabinetry, furniture assembly, and general construction; however, users should note that as a flat bit, it is strictly intended for use with timber rather than hard metals or masonry.

All features

Model Part NumberSNAP/FB/30
BrandTrend

Extended Product Information

FAQs

Can I use this bit for drilling plastic or PVC?

While intended for timber, it can be used for softer materials like plastic if handled with care, though wood will always yield the best performance.

Is this compatible with standard drill drivers?

Yes, the 1/4-inch hex shank is compatible with virtually all standard drill drivers and quick-change chuck systems.

How do I sharpen the bit?

You can touch up the cutting edges with a fine diamond file, taking care to maintain the original back-tapered angle.

What is the primary benefit of the Snappy system?

The Snappy system allows for near-instant switching between different drill bits, countersinks, and drivers, significantly speeding up workflow.

Should I use a pilot hole?

The centre point acts as a pilot, so a separate pilot hole is not required for most soft and medium-density woods.

Is this bit available in other sizes?

Yes, the Trend Snappy Flat Bit range includes various sizes ranging from 10mm up to 30mm.

Troubleshooting

Bit slipping in the drill chuck

Ensure the hex shank is fully seated in the chuck and that the three-jaw chuck is tightened evenly across the flats of the shank.

Rough hole edges or 'blow-out'

Drill at a higher speed and reduce pressure as the bit exits the material, or use a sacrificial piece of timber beneath your workpiece.

Bit is getting very hot

Reduce feed pressure and allow the bit to clear chips more frequently by withdrawing the drill partially during the process.

Pros and Cons

Pros

  • Clean, professional hole finishes
  • Rapid bit changes with the Snappy system
  • Efficient chip clearance for faster drilling
  • Secure fit in standard 1/4-inch hex chucks

Cons

  • Not suitable for drilling through metal or stone
  • Requires proper technique to prevent blow-out on exit
  • Limited to timber applications

Setup, Compatibility & Care

To attach the bit, simply insert the 1/4-inch hex shank into your quick-release adapter until it clicks into place. If you are using a standard three-jaw drill chuck, ensure the jaws are tightened securely onto the flat surfaces of the hex shank to prevent slippage.

Care Instructions:

  • Keep the cutting edges free of sap and resin by using a dedicated blade cleaner.
  • Store in a dry area to prevent rust.
  • Avoid striking nails or screws within the timber, as this will dull the precision cutting edge immediately.
  • Periodically inspect the shank for burrs that might hinder quick-release functionality.

Price History

DatePrice
Visit shop