Philips Hue Flux connector 4-pack

No, these connectors are specifically designed for straight-line connections only. They cannot be used to create corners or angled joins between strip lights.

These connectors are compatible with Philips Hue Flux and Philips Hue Flux ultra-bright strip lights.

Each connector is designed to join two pieces of cut strip light together in a straight line.

You can cut your Hue Flux strip light at the marked intervals, which are every 16.7cm.

The connectors themselves do not require a Hue Bridge, but they are part of the Philips Hue system. To control your lights wirelessly and access smart features, a Hue Bridge and the Hue app are recommended.

You can cut the strip at any 16.7cm interval and use connectors. However, each cut is permanent for that segment of the strip.

Check that the strip light is properly seated within the connector and that the copper contacts are aligned and making good contact. Ensure the power supply is connected and functional.

Verify that the connector is fully closed and that both pieces of strip light are securely inserted. Damaged strip segments or a faulty connector can cause performance issues.

Ensure no excess plastic or debris is obstructing the connector. The strip should be inserted straight and fully to allow the connector to snap shut.