Palm Air Sander - SGS
Best current price£55.79from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£55.79Visit shop SGS 6in Palm Air Sander, Dual Action, 1/4in Inlet, 10000RPM Random Orbit Sander
Visit shopeBay£55.79Visit shop One Offer
1 offer from £55.79
View price history by clicking the chart icon.
eBaySGS 6in Palm Air Sander, Dual Action, 1/4in Inlet, 10000RPM Random Orbit Sander
Free delivery in 1–3 days
£55.79
Visit shop
Product Information
Full details
The SGS Palm Air Sander is designed for professionals and DIY enthusiasts seeking efficient and comfortable sanding. Its lightweight, balanced design with a rubberized head cover minimizes user fatigue, while the 3/16" orbital motion ensures a scratch-free finish. A key benefit is its versatility, allowing for precise control with a variable speed trigger and adjustable air regulator, though users should ensure proper air supply for optimal performance.
All features
| Model Part Number | SAT602 |
|---|---|
| Brand | SGS |
Extended Product Information
FAQs
What type of sandpaper is compatible with this sander?
The SGS Palm Air Sander is compatible with standard hook-and-loop sandpaper discs designed for orbital sanders, typically in 5-inch or 6-inch diameters depending on the pad size.
How do I adjust the speed of the sander?
Speed is adjusted using the variable speed actuating trigger and the integrated adjustable air regulator. Squeeze the trigger further for more speed and use the regulator to fine-tune the maximum speed.
What is the recommended air pressure for this sander?
While specific PSI can vary, always refer to the manufacturer's recommended operating pressure range, typically found in the product manual. Ensure your air compressor can consistently supply this pressure and adequate air volume (CFM).
Can this sander be used for wet sanding?
No, this is an air-powered dry sander. It is not designed for wet sanding applications.
How is the dust collection feature utilized?
The sander offers a 2-in-1 design. You can connect it to a vacuum dust collection system for active dust extraction, or use it in a non-vacuum mode where dust is expelled through the rear exhaust.
What does '3/16" orbital motion' mean for the finish?
The 3/16" (or 5mm) orbital motion refers to the diameter of the circle the sanding pad makes as it spins. This specific orbit is designed to provide an efficient cut while minimizing the risk of leaving swirl marks or scratches on the surface, contributing to a smoother finish.
How do I maintain the sealed bearings?
The sealed bearings are designed to be maintenance-free and do not require user lubrication. The primary care is to prevent dust and debris from entering the bearing seals.
Troubleshooting
Sander not spinning or spinning slowly
Check air hose connection for leaks. Ensure the air compressor is providing sufficient pressure (PSI) and volume (CFM). Verify the variable speed trigger is not set too low. Clean or replace the air inlet filter if clogged.
Excessive vibration
Ensure the sandpaper is securely attached to the pad. Check if the sanding pad is damaged or unbalanced. Verify the tool's internal balance is intact (if vibration is severe, contact support).
Poor surface finish (swirl marks or scratches)
Ensure you are using the correct sandpaper grit for the task. Verify the sander's orbital motion is functioning correctly (3/16" orbit). Reduce pressure slightly and ensure consistent movement across the surface.
Dust collection is ineffective
Ensure the dust port is clear of debris. Check that the vacuum hose is properly connected and not kinked. If using the non-vacuum option, ensure the exhaust is not obstructed.
Pros and Cons
Pros
- Ergonomic design reduces user fatigue.
- Produces a high-quality, scratch-free finish.
- Offers precise speed control for various applications.
- Durable construction with sealed bearings.
- Versatile with 2-in-1 dust collection capabilities.
Cons
- Requires a consistent and adequate air supply.
- May be too powerful for very delicate tasks without careful speed control.
- Dust collection efficiency can vary depending on the setup.
- Not suitable for cordless operation.
Setup, Compatibility & Care
Setup:
- Ensure a clean, dry air supply is connected to the sander's air inlet using appropriate fittings and hose.
- Connect the sander to an air compressor capable of providing adequate PSI and CFM for optimal operation.
- Attach the desired sandpaper grit to the sanding pad.
- If using the vacuum function, connect a compatible dust collection system.
Compatibility:
- Requires an air compressor with a minimum output suitable for pneumatic tools (check tool specifications for exact PSI/CFM requirements).
- Compatible with standard 5mm (or 3/16 inch) orbital sanding pads.
- Works with common hook-and-loop sandpaper discs.
Care:
- After Each Use: Disconnect from air supply. Wipe down the tool with a clean, dry cloth. Check and clean the sanding pad.
- Regular Maintenance: Periodically check the air filter for your compressor. Ensure the tool's air regulator is functioning correctly.
- Storage: Store in a clean, dry environment. Avoid exposing the tool to extreme temperatures or moisture.
- Sealed Bearings: These require no user lubrication, but ensure no abrasive dust penetrates the seals.