Best current price£7.99from eBay
Shopping.co.uk recommended and popular offers
eBay£7.99Visit shop Pro-Matic Colour Coat Lavender Bloom Blue Lilac Satin RAL 4005 Spray Paint 400ml
Visit shop
Amazon£9.14Visit shop Colour Coat Pro-Matic Lavender Bloom Blue Lilac Satin RAL 4005 Aerosol Spray Paint 400ml (1)
Visit shop5 offers from £7.99 - £10.49
View price history by clicking the chart icon.
The Colour Coat Spray Paint in Blue is designed for DIY enthusiasts and professionals seeking a high-quality, durable finish for various surfaces like wood, metal, and masonry. Its key benefit is superior coverage and a long-lasting, UV-resistant finish. A potential caveat is the need for proper ventilation due to its spray application. This premium paint offers excellent coverage, durability, and a fast-drying formula in a wide array of colours and finishes.
| Colour | Blue |
|---|---|
| Model Part Number | CCPLB400-S |
| Brand | Colour Coat |
The number of coats depends on the surface and desired finish. For most surfaces, two to three thin, even coats provide optimal coverage and durability. Always allow adequate drying time between coats.
Yes, Colour Coat is designed with low VOCs and can be used indoors, provided you ensure adequate ventilation during application and drying.
Gently wipe the painted surface with a damp cloth and mild soap. Avoid using abrasive cleaners or harsh chemicals that could damage the finish.
Drying times vary based on temperature, humidity, and application thickness. Typically, it is touch-dry within 15-30 minutes and can be recoated after 1-2 hours. For full cure, allow 24-48 hours.
Yes, it can be applied over existing paint if the surface is clean, dry, and the existing paint is in good condition. For best results, lightly sand glossy surfaces before application.
Colour Coat is versatile and suitable for wood, metal, plaster, and masonry. Ensure proper surface preparation for each material.
Ensure the nozzle is not clogged. Shake the can vigorously for the recommended time. If the issue persists, try cleaning the nozzle with a solvent or replacing the can.
This usually occurs from applying too much paint at once. Wipe away excess wet paint immediately. Allow the area to dry, lightly sand, and reapply in thin, even coats.
The surface may not have been properly prepared. Ensure it was clean, dry, and free of contaminants. For glossy surfaces, ensure they were lightly sanded. Reapply after proper surface preparation.
Colour appearance can vary based on the underlying surface colour and the number of coats applied. Ensure the surface was properly primed and apply sufficient coats for full opacity. Check the specific shade against a colour chart.
Preparation: Ensure the surface is clean, dry, and free from dust, grease, and loose material. Lightly sand glossy surfaces before application for better adhesion. For porous surfaces like unpainted wood or plaster, apply a suitable primer first.
Application: Shake the can vigorously for at least two minutes before use. Hold the can upright, about 25-30 cm from the surface. Apply in thin, even coats using a steady sweeping motion. Avoid applying too thickly to prevent runs and drips. Allow adequate drying time between coats as recommended on the can.
Compatibility: Colour Coat is suitable for use on wood, metal, plaster, and masonry. It is not recommended for use on plastics or flexible surfaces unless a specific primer for those materials is used first.
Care: Clean up spills immediately with a suitable solvent (refer to product label for specifics). For the painted surface, clean gently with a damp cloth and mild soap. Avoid abrasive cleaners.
