kenable External SHIELDED CAT5e Outdoor COPPER Ethernet Cable FTP Reel - 50m
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This kenable Cat5e FTP outdoor cable is designed for reliable network connections in challenging environments. It offers robust shielding to minimize interference and a UV-resistant, weatherproof sheath suitable for direct burial or outdoor installation, delivering up to gigabit speeds. A key caveat is that it requires specific cable clips and faceplates for optimal performance.
All features
| Series | Cat5e |
|---|---|
| Model Part Number | 008541 |
| Brand | kenable |
Extended Product Information
FAQs
What does FTP mean for this cable?
FTP stands for Foiled Twisted Pair. It indicates that the cable has an overall foil shield around the twisted pairs, providing protection against electromagnetic interference.
Can I use this cable for direct burial?
Yes, this cable features a UV-resistant PE sheath and is designed to be weatherproof, making it suitable for direct underground installation.
What network speeds can this Cat5e cable support?
This Cat5e cable is capable of supporting up to Gigabit Ethernet speeds (1000BASE-T), provided that all other network components also support these speeds.
Is this cable solid core or stranded?
This is a solid core cable, indicated by the 24AWG conductor material. Solid core cables are generally preferred for fixed installations and longer runs.
Do I need special tools to install this cable?
Yes, you will need tools for terminating the cable, such as an RJ45 crimping tool, a cable stripper, and potentially a punch-down tool for faceplates. You will also need 6mm cable clips.
What is the purpose of the drain wire?
The drain wire runs alongside the shielded pairs and is used to conduct electrical current away from the cable, typically to an earth ground. This helps protect against surges and interference.
Is this cable RoHS compliant?
Yes, the product specifications state that it is RoHS compliant, meaning it adheres to restrictions on hazardous materials.
What is a Fluke test?
A Fluke test is a performance test conducted using specialized equipment (like a Fluke network tester) to verify that the cable meets industry standards for parameters such as resistance, insertion loss, and frequency response over its specified length.
Troubleshooting
Slow network speeds or intermittent connectivity.
Ensure the cable is properly terminated with RJ45 connectors. Check for any kinks or damage to the cable. Verify that the rest of your network infrastructure (router, switch, NIC) supports gigabit speeds. Ensure shielding is correctly terminated if grounding is applied.
Cable jacket is damaged.
If the damage is minor and does not affect the shielded pairs, you may be able to repair it with electrical tape. For significant damage, it is recommended to replace the affected section of the cable.
High ping times or packet loss in outdoor installations.
Verify the drain wire is properly connected to an earth ground. Check for nearby sources of strong electromagnetic interference that might be impacting the shielded pairs. Ensure the cable is not laid parallel and too close to power lines.
RJ45 connector not making a secure connection.
Use an RJ45 crimping tool designed for solid core cables. Ensure the cable strands are correctly seated within the connector before crimping. Try a different connector if one appears faulty.
Pros and Cons
Pros
- Excellent interference protection due to foil shielding and drain wire.
- Durable construction suitable for harsh outdoor and underground conditions.
- Supports high-speed gigabit networking.
- Fluke tested for verified performance and reliability.
- Flexible and easy to install.
Cons
- Requires specific 6mm cable clips.
- Recommended to use faceplates designed for full copper cables for best results.
- Not supplied with connectors, requires termination.
- 50m length may not be sufficient for all installations.
Setup, Compatibility & Care
Setup:
- Termination: This cable is supplied on a reel and requires termination with RJ45 connectors. Use appropriate tools for stripping the outer jacket and foil, and follow standard T568A or T568B wiring configurations.
- Faceplates: For indoor terminations or connections to patch panels, it is recommended to use faceplates designed for full copper cables to ensure a proper connection.
- Cable Clips: Use 6mm cable clips specifically designed for this cable size to secure it without damaging the shielding or sheath.
- Earthing: Connect the drain wire to a suitable earth ground point if required for enhanced protection against electrical surges or interference.
Compatibility:
- Network Standards: Compatible with Fast Ethernet (100BASE-TX) and Gigabit Ethernet (1000BASE-T) networks.
- Connectors: Requires RJ45 connectors suitable for solid core, 24AWG Cat5e cable.
- Testing Equipment: Compatible with Fluke network testers for performance verification.
Care:
- Cleaning: Wipe the exterior with a dry or slightly damp cloth. Avoid harsh chemicals or solvents.
- Protection: While designed for outdoor use and burial, avoid sharp bends, kinks, or excessive tension during installation to maintain cable integrity.
- Storage: Store on the reel in a cool, dry place if not fully used to prevent damage.