Setup, Compatibility & Care
Preparation: For optimal performance, surfaces must be clean, dry, and free from dirt, grease, and any loose material. Previously painted surfaces should be lightly sanded. Bare wood or metal should be primed with an appropriate Farrow & Ball primer (e.g., Metal Primer, Wood Primer & Undercoat).
Application: Stir the paint thoroughly before and during use. Apply evenly using a good quality brush. Two coats are generally recommended for best results. Avoid applying in very humid conditions or direct strong sunlight. Ensure adequate drying time between coats.
Compatibility: Suitable for exterior wood and metal surfaces. Not recommended for use on floors or high-traffic areas.
Care: Clean application tools with water immediately after use. For maintaining the painted surface, gently wipe with a damp cloth and mild detergent if necessary. Avoid abrasive cleaners.