Best current price£47.43from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£47.43Visit shop Abb System Pro M Compact 1-Phase Transformer 12-24V | 2Csm251043r0811
Visit shop1 offer from £47.43
View price history by clicking the chart icon.
This ABB System pro M compact Transformer is designed for professionals in industrial and commercial vehicle applications needing a reliable single-phase control transformer. Its key benefit is providing a stable, safe power supply with adjustable secondary voltages, though its modular rail-mounting design might require specific enclosure considerations. The transformer features a compact, modular design for DIN rail mounting, adjustable secondary voltages (12-24V), and safety transformer functionality with IP20 protection.
| Model Part Number | 2 csm251043r0811 |
|---|---|
| Brand | ABB |
The apparent power rating for this model is 25VA.
The secondary voltage can be adjusted between 12V and 24V.
The primary voltage requirement is 230V.
The protection type is IP20.
No, this transformer is designed for control circuits, instrumentation, and low-power devices, not for direct supply to high-power equipment. Its rating is 25VA.
It is designed for mounting on a standard 35mm DIN rail.
Yes, some models are available as through-feed current converters, for example, the TS25/5A model for primary 25A to secondary 5A conversion.
Verify the primary voltage supply (230V) is present and correctly connected. Check all terminal connections for tightness. Ensure the circuit breaker or fuse for the primary circuit is engaged.
Confirm the secondary voltage is set correctly. Check if the connected load exceeds the transformer's 25VA rating. Ensure connections are not loose or corroded.
Ensure adequate ventilation around the transformer. Check that the connected load is within the specified VA rating. Verify that the ambient temperature is within the operating limits.
Check for short circuits in the secondary wiring or the connected load. Ensure the load current does not exceed the transformer's capacity.
Setup: This transformer is designed for DIN rail mounting. Ensure the rail is securely installed in the control cabinet. Connect the primary voltage (230V) to the designated input terminals, observing correct polarity. Connect the secondary load to the output terminals, configuring the voltage to the desired level (12V or 24V) using the adjustment mechanism, if applicable. Ensure all connections are tight and conform to local electrical codes.
Compatibility: Compatible with standard 35mm DIN mounting rails. Primarily designed for 230V single-phase power systems. Ensure the connected load does not exceed the transformer's 25VA rating or the specific current limits of the secondary voltage configuration.
Care: Keep the transformer clean and free from dust and debris. Ensure adequate ventilation around the unit to prevent overheating. Periodically check electrical connections for tightness. Do not expose to moisture or corrosive environments. Cleaning should be done with a dry or slightly damp cloth only when the unit is de-energized.
