Chain Bolt Cutter - 12" - SecureFix Direct

The maximum cutting capacity is 4mm. However, this is a guideline and may vary depending on the hardness and type of metal being cut.

It is suitable for cutting a wide variety of metals, including soft iron wire, mild steel rods, small bolts, and general-purpose chain, provided they are within the 4mm diameter limit.

You can maintain performance by cleaning the blades after use, lubricating the pivot point, and using the adjusting screws to tighten the cutting jaws when they loosen after prolonged use.

The product description does not specify replaceable handles, but the rubber grips are designed for comfort and durability.

While it can cut small bolts, it is generally not recommended for cutting padlocks, as they are often made of hardened steel exceeding the cutter's capacity and design.

Drop forging is a manufacturing process where metal is heated and hammered into shape. It results in a stronger, more durable tool with improved grain structure compared to other methods.

Store the bolt cutter in a dry environment, with the jaws closed or secured, to prevent rust and accidental damage.

Check if the jaws need tightening using the adjusting screws. Ensure the material is within the 4mm cutting capacity and is not excessively hard.

Use the adjusting screws to align and tighten the cutting jaws. Ensure the pivot point is clean and lubricated.

Clean the rust with a fine-grit sandpaper or steel wool, then apply a rust inhibitor or light machine oil. Ensure the tool is stored in a dry place.

Ensure you are using the tool correctly, maximizing leverage with the 12-inch handles. Check that the jaws are correctly aligned and adjusted.