Sealey Beam Clamp - 2 Tonne - BC2000

The Sealey Beam Clamp BC2000 has a maximum weight capacity of 2 tonnes (2000kg).

The clamp can be adjusted to fit steel beams with a width ranging from 75mm to 220mm.

This clamp is designed primarily for vertical lifting attachment points or for lifting/pulling steel beams themselves, not for suspending loads horizontally from a beam.

The net weight of the Sealey BC2000 beam clamp is 4.35kg.

Standard chain blocks, hoists, and lifting tackle can be attached to the integral lifting point, which has a diameter of Ø22mm.

Ensure the clamp is positioned on a suitable beam within the adjustable width range and tightened securely. The jaws should make firm contact with the beam flanges. Regular inspection after fitting is recommended.

The description mentions 'semi-permanent attachment,' suggesting it is intended for repeated use over time but can be removed and repositioned. It is not designed for permanent structural integration.

Ensure the beam is within the specified width range. Tighten the clamp mechanism more firmly. Inspect the beam and clamp jaws for any debris or damage that could prevent a secure grip.

Clean any dirt or debris from the adjustment mechanism. Lubricate the threaded rod if necessary. Ensure the clamp is not fully loaded while adjusting.

Immediately cease use and thoroughly inspect the lifting point for cracks, deformation, or excessive wear. Do not use if any damage is apparent; contact the manufacturer or a qualified inspector.

Clean the affected area with a wire brush. Apply a rust inhibitor or lubricant to protect the metal. For significant corrosion, consult a professional for assessment.