Bartoline Knotting Solution - Black

Allow the knotting solution to dry completely. Typically, it is touch dry within 5-10 minutes and can be recoated after 30 minutes under normal conditions. However, always check the product label for specific instructions.

The Bartoline Knotting Solution - Black can be used on most types of wood. It is particularly effective on softwoods like pine, where knots are common. However, testing on a small, inconspicuous area is always recommended before applying to a large surface.

Light sanding after the knotting solution has dried can help create a smoother surface for your topcoat. However, it is not always necessary.

Wipe up spills immediately with a clean cloth. Use a solvent appropriate for the formula (alcohol) to remove any residue. Ensure proper ventilation.

Store in a cool, dry place, away from direct sunlight and heat. Keep the container tightly sealed when not in use.

Bartoline Knotting Solution - Black is primarily designed for interior use. While it may provide some protection, it is not specifically formulated for the harsh conditions of exterior applications. For outdoor projects, use products specifically designed for that purpose.

Ensure the knotting solution was fully dry before applying the topcoat. Apply another coat of knotting solution and allow to dry before repainting.

Apply in thin, even coats. Avoid over-application. Sand lightly between coats if necessary.

Ensure proper ventilation. The drying time may be extended in humid conditions. Allow extra drying time.