Fiddes Nitro Floor Stain - Dark Oak
Best current price£34.91from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£34.91Visit shop B&Q - FiddesNitro Floor Stain1 LitreDark Oak
Visit shopB&Q£34.91Visit shop One Offer
1 offer from £34.91
View price history by clicking the chart icon.
Product Information
Full details
The Fiddes Nitro Floor Stain in Dark Oak is designed for DIY enthusiasts and professionals seeking to enhance wooden flooring with a deep, penetrating oil-based color. Its key benefit is providing a uniform, rich shade that prepares surfaces perfectly for Hard Wax Oil finishes. A potential caveat is the need for meticulous surface preparation and immediate excess stain removal to achieve optimal results.
All features
| Colour | Brown |
|---|---|
| Model Part Number | Floor Stain |
| Brand | Fiddes |
Extended Product Information
FAQs
What is the coverage rate of Fiddes Nitro Floor Stain?
The coverage is approximately 14 square meters per liter, though this can vary depending on the porosity of the wood and the method of application.
Can I use Fiddes Nitro Floor Stain as a final finish?
No, this product is a penetrating stain designed to color the wood. It must be followed by a protective topcoat, such as Fiddes Hard Wax Oil.
How should I prepare the wooden floor before applying the stain?
The floor should be sanded in stages, starting with 120 grit sandpaper and finishing with 180-220 grit. Ensure all dust and imperfections are removed.
How long does Fiddes Nitro Floor Stain take to dry?
Drying time is typically 6-8 hours at room temperature. Ensure adequate ventilation for best results.
Can I apply multiple coats of the stain?
Yes, additional coats can be applied to deepen the color. Allow each coat to dry for 6-8 hours before applying the next. Do not sand between coats.
What is the best way to apply the stain?
Apply using a clean, lint-free cotton cloth or sponge, working in the direction of the wood grain. Immediately remove any excess with a clean, absorbent cloth.
How do I clean my tools after using this stain?
Tools should be cleaned immediately after use with appropriate solvents. Please refer to the product's safety data sheet or packaging for specific cleaning agent recommendations.
Troubleshooting
Uneven or blotchy color application
Ensure the wood was sanded uniformly and all dust removed. Wipe away excess stain immediately after application using a clean cloth, following the grain. Avoid over-applying in certain areas.
Stain not drying within the specified time
Verify that the room temperature is within the recommended range (around 20°C). Ensure proper ventilation. Thicker applications or high humidity can extend drying times.
Color is lighter than expected
Apply additional coats of Fiddes Nitro Floor Stain, allowing each coat to dry thoroughly before applying the next. Ensure even application across all coats.
Wood appears dull or lacks sheen after application
Fiddes Nitro Floor Stain is a colorant and requires a topcoat for protection and sheen. Apply a compatible finish like Fiddes Hard Wax Oil.
Pros and Cons
Pros
- Provides a rich, uniform color to wooden floors.
- Acts as an excellent base coat for Fiddes Hard Wax Oil.
- Relatively fast drying time allows for quicker project completion.
- Easy to apply with common tools like cloths or sponges.
- Allows for color depth adjustment by adding more coats.
Cons
- Requires thorough wood preparation, including fine sanding.
- Excess stain must be removed immediately to avoid unevenness.
- Color can vary based on wood type and application technique.
- Oil-based formula requires specific cleanup procedures.
- Not suitable for direct use as a topcoat; requires a finishing product.
Setup, Compatibility & Care
Preparation:
- Sand the wooden floor thoroughly, starting with a medium grit (120) and progressing to a finer grit (180-220).
- Ensure all sanding dust, blemishes, and glue residue are completely removed.
- Test the stain on a small, inconspicuous area or a similar wood sample to confirm the desired color.
Application:
- Stir the Fiddes Nitro Floor Stain well before use.
- Always check the shade before application on the main surface.
- Apply evenly using a clean, lint-free cotton cloth or sponge, working in the direction of the wood grain.
- Immediately wipe away any excess stain with a separate, clean absorbent cloth, following the grain.
- For a uniform color, ensure even wiping and blending across the entire surface.
Drying and Further Coats:
- Allow the stain to dry for 6-8 hours at room temperature.
- Do not sand between coats.
- Apply additional coats to achieve a deeper color, allowing adequate drying time between each.
Compatibility:
- Specifically designed for use under Fiddes Hard Wax Oil.
- Suitable for most wooden flooring applications.
Care:
- Clean application tools immediately after use with appropriate solvents (refer to product packaging for specific recommendations).
- Store the product in a cool, dry place, away from direct sunlight and heat.