Best current price£20.05from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£20.05Visit shop Rapid Steel Rivet Nuts 5063750476308
Visit shop
B&Q£21.86Visit shop B&Q - Steel Rivet Nuts Multi Colour (M5)
Visit shop3 offers from £20.05 - £21.86
View price history by clicking the chart icon.
Rapid Rivet Nuts are the ideal fastening solution for metalworkers and DIY enthusiasts who need to secure components when access to the rear side of a material is limited or impossible. These fasteners provide a durable, internally threaded anchor point that significantly increases installation efficiency. While they are highly effective for thin materials under 3mm, they require a specific rivet nut tool for proper installation, which may be a barrier for those who do not own one.
| Colour | Multicolor |
|---|---|
| Brand | Rapid |
These are primarily designed for metal sheets. Using them on plastic may result in the material cracking during the compression process.
Yes, you require a rivet nut installation tool, also known as a nut setter, to properly deform the fastener.
Over-tightening can strip the internal threads of the rivet nut or cause the entire unit to rotate within the hole.
They are designed to be permanent. Removing them usually requires drilling them out, which may damage the surrounding material.
They are intended for fastening components, not for primary structural support in heavy-load applications.
This specific variant is optimized for materials with a grip range under 3mm.
The hole was likely drilled too large. Ensure you are using the correct drill bit size specified for the rivet nut diameter.
This is often caused by over-compressing the nut during installation. Adjust the depth setting on your rivet nut tool to prevent excessive force.
Verify that your material thickness is within the 3mm range. If the material is too thin or too thick, the shank will not deform correctly.
To install Rapid Rivet Nuts, you must use a compatible rivet nut setting tool. First, drill a hole in your material that matches the required diameter of the rivet nut. Insert the nut into the hole and thread it onto the tool's mandrel. Activate the tool to compress the nut; the shank will deform against the rear of the material, locking it firmly in place.
Compatibility is strictly defined by the grip range; ensure the combined thickness of the materials being joined is under 3mm. To maintain the integrity of the threaded connection, avoid over-tightening during the setting process, as this can damage the internal threads. No special maintenance is required post-installation, but check for tightness after initial vibration stress tests.
