Sharp Heat Pump Tumble Dryer - White

No, this is a heat pump dryer, which means it uses a closed-loop system to recycle heat and does not require external venting.

The water collection tank is typically located at the top left of the unit; pull it out, pour the water into a sink, and slide it back into place.

Always check the garment's care label. While heat pump dryers are gentler, you should only tumble dry wool if it is labeled as 'tumble dry safe'.

The lint filter should be cleaned after every single drying cycle, while the condenser filter should be checked and cleaned monthly.

The unit measures 850 mm in height, 600 mm in width, and 610 mm in depth.

Yes, you can pause the cycle to open the door, add items, close it securely, and press start to resume.

Ensure the lint filter is clean and that you have not exceeded the 8 kg maximum load capacity.

Clean the condenser filter and check that the room temperature is not too low, as heat pumps perform best in standard indoor temperatures.

Verify that the unit is perfectly level on the floor and that no large items like zippers or buttons are hitting the drum.