Control Relay - TeSys K - 2NO + 2NC - 10 A - CA2KN22F7

The CA2KN22F7 is designed for both AC and DC control circuits.

It is designed for mounting on a standard 35mm DIN rail.

This specific model, CA2KN22F7, features 2 Normally Open (NO) and 2 Normally Closed (NC) contacts.

The relay can operate reliably in temperatures from -25°C to 50°C.

Yes, it is certified by CSA and UL.

The product description indicates a 10A rating. Always refer to the specific datasheet for detailed current limits per contact type.

This relay is intended for control circuits and simple applications, not for directly switching high-power loads. It is typically used to control contactors or other devices that handle higher power.

Verify control voltage at the coil terminals. Ensure the voltage is within the relay's operating range. Check for loose wiring connections.

Ensure the control voltage is correctly applied to the coil. Check for any physical obstructions. If contacts are damaged, the relay may need replacement.

Check for loose terminal connections. Ensure the ambient temperature is within the specified operating range. Inspect for signs of electrical arcing or contact wear.

Confirm that the connected load is within the relay's current carrying capacity. Ensure proper ventilation around the relay in the enclosure. Check for short circuits in the connected wiring.