Best current price£41.36from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£41.36Visit shop Storm White Polyx Aluminium F Section - 16Mm X 4Mtr
Visit shop2 offers from £41.36
View price history by clicking the chart icon.
The PolyX Aluminium F Section is designed for professional installers and DIY enthusiasts working with 16mm polycarbonate roofing or wall panels. This trim provides a clean, weather-resistant edge finish that secures the side of your installation. It is an essential component for projects requiring a polished aesthetic and long-term durability, though its rigid aluminium construction requires careful measurement and cutting before installation to avoid material waste.
| Model Part Number | AF164-W |
|---|---|
| Brand | Storm |
No, this product is specifically engineered for 16mm polycarbonate sheets and will not provide a secure fit for other thicknesses.
The F-section is typically friction-fitted, but you may choose to secure it with self-drilling screws if your specific project requirements mandate extra mechanical fixing.
Yes, the aluminium features a durable, weather-resistant powder coating designed to withstand direct sunlight without yellowing or peeling.
While the factory white finish is durable, you can prime and paint the aluminium with an appropriate metal-bonding spray paint if you need to match a specific color scheme.
Support the section on a stable workbench along its full length. Use a sharp, fine-toothed hacksaw and apply even, light pressure to avoid deforming the aluminium profile.
Check the polycarbonate panel for plastic burrs at the edges and remove them with a utility knife before attempting to slide the trim on again.
Ensure the panel is truly 16mm thick. If the fit remains loose, you may need to apply a thin bead of neutral-cure silicone sealant along the inside of the channel before sliding it on.
Touch up minor scratches on the white surface using a matching exterior-grade touch-up paint designed for aluminium.
To install, measure the length of your polycarbonate sheet edge and cut the aluminium section using a hacksaw or a metal-cutting circular saw. Deburr the cut edges to ensure they do not scratch the polycarbonate surface. Slide the F-section onto the edge of the 16mm panel; if necessary, use a rubber mallet to tap it into place gently.
Compatibility is strictly limited to 16mm polycarbonate panels. To maintain the finish, wipe the aluminium with a soft, damp cloth and a mild detergent during your annual roof cleaning. Avoid using abrasive cleaning pads or strong solvents, as these can damage the white powder-coated surface.
