FGV Drawer Front Fixing Brackets - 85X32X14mm

These brackets are specifically designed for FGV metal drawer sides. Compatibility must be confirmed by checking your drawer system's specifications and the bracket dimensions (85x32x14mm with 64mm hole centers).

You will typically need a screwdriver (appropriate for the screws you use) and a measuring tape. A drill may be required to create pilot holes if they are not pre-existing.

No, the screws for attaching the brackets are usually not included and must be sourced separately to match the drawer material and thickness.

The number of brackets required depends on the size and design of your drawer. Typically, two brackets are used per drawer, one on each side, but check your specific FGV drawer system instructions.

Yes, they are ideal for replacing old or damaged fixing brackets to ensure the drawer front is securely reattached.

The hole center distance for these FGV brackets is 64mm.

The product description indicates they are designed for FGV metal drawer sides, and the brackets themselves are made from a durable material suitable for this purpose.

Check that the screws fixing the bracket to both the drawer side and the drawer front are securely tightened. Ensure the bracket itself is correctly seated and aligned.

Verify compatibility by re-measuring the hole center distance (should be 64mm) and bracket dimensions. If incompatible, you may need a different bracket model.

Ensure you are using screws of the correct size and type for the material of your drawer front and side. The pilot holes may need to be slightly adjusted or re-drilled.

This may indicate the drawer is overloaded or excessive force is being applied. Check that the bracket is not damaged and consider distributing the weight within the drawer more evenly.