Rapid Rivet Nuts - Multicolor
Best current price£15.00from The Range
Best offers
Shopping.co.uk recommended and popular offers
The Range£15.00Visit shop Rapid Steel Rivet Nuts A - Multi Colour
Visit shopThe Range£15.00Visit shop All Offers
4 offers from £15.00 - £19.36
View price history by clicking the chart icon.
Product Information
Full details
Rapid Rivet Nuts are the ideal solution for metalworkers, hobbyists, and DIY enthusiasts who need to create durable, threaded attachment points in materials where access to the rear side is restricted. These fasteners provide the benefit of a secure captive nut while acting as a rivet, significantly speeding up assembly tasks by allowing for single-sided installation. A primary caveat to keep in mind is that they are specifically engineered for thin materials with a grip range of less than 3mm, making them unsuitable for thick plate applications.
All features
| Colour | Multicolor |
|---|---|
| Model Part Number | 1242888 |
| Brand | Rapid |
Extended Product Information
FAQs
Can I use these for materials thicker than 3mm?
No, these specific rivet nuts are engineered for a grip range of under 3mm and will not install correctly on thicker materials.
Do I need a special tool to install them?
Yes, a rivet nut setting tool is required to correctly deform the nut and secure it to the material.
Can these be used in wood?
They are designed primarily for metal and thin-gauge materials. Usage in wood is not recommended as they may pull out.
How do I know what size hole to drill?
Always drill a hole that matches the outer diameter of the rivet nut sleeve for a snug, accurate fit.
Are these reusable?
No, rivet nuts are permanent fasteners. Once installed, they are intended to remain as a fixed threaded point.
Troubleshooting
Rivet nut rotates when tightening the bolt
The nut was not compressed enough during installation. Use the setting tool to apply more pressure to achieve a firmer grip.
Bolt will not screw into the rivet nut
Check for debris inside the threads or ensure the nut was not deformed during installation. Also, verify the bolt thread pitch matches the nut.
Pros and Cons
Pros
- Enables one-sided assembly, saving significant time
- Eliminates the need for traditional nuts on the backside
- Provides a strong, threaded hole in thin materials
- Versatile application as both a rivet and a captive nut
Cons
- Limited to materials with a grip range under 3mm
- Requires a specific rivet nut setting tool
- Not suitable for heavy-duty structural load-bearing
Setup, Compatibility & Care
To install, ensure your base material thickness is under 3mm. You must use a compatible rivet nut setting tool designed for the specific thread size of your nut. 1. Drill a hole that matches the diameter of the rivet nut sleeve. 2. Thread the nut onto the setting tool mandrel. 3. Insert the nut into the prepared hole. 4. Actuate the tool to compress the nut, which secures it to the material. For maintenance, ensure the internal threads are kept free of debris during installation to prevent cross-threading your bolts. Avoid using high-torque impact drivers, as these can strip the threads or damage the deformed flange.