Deta Light Switch - Black

'3 Gang' means there are three independent switches on the plate. '2 Way' means each switch can be wired to control a light from two different locations (e.g., top and bottom of stairs). It can also be wired as a standard '1 Way' switch if only one location control is needed.

No, this is a standard on/off light switch and is not designed for dimming. Using it with a dimmer function could damage the switch or the lights.

Please refer to the product packaging or Deta's official warranty information for specific details on the warranty period.

This switch is specifically designed for lighting circuits only and should not be used for extractor fans or power outlets, as these may have different load requirements or require different switch ratings.

Yes, this switch is designed to be earthed, and proper earthing is crucial for electrical safety. Ensure your wiring system includes an earth connection.

The front plate has a slim profile, measuring 7mm in depth.

Verify that the power supply is on and that the circuit breaker is engaged. Check all wire connections to ensure they are secure and correctly placed according to the wiring diagram. Ensure the correct configuration (1-way or 2-way) has been followed.

Turn off the power. Inspect the specific gang's wiring for loose connections or damage. If using 2-way switching, ensure the traveler wires are correctly connected between the two switches.

Ensure the load does not exceed the 10 Amp rating. Check for loose connections at the switch and the light fitting. For LED lights, ensure compatibility with the switch type, as some LEDs require specific dimmer or switch types.

Turn off the power. Tighten the mounting screws securing the switch to the wall box.