Lumatic Cast Iron Rotary Barrel Pump - 5063750396668
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Lumatic Cast Iron Rotary Barrel Pump is designed for efficient transfer of diesel, motor oil, gearbox oil, and hydraulic oil from 205-litre drums. It offers a robust solution for workshops and industrial settings needing to move viscous fluids reliably. A potential caveat is that it is specifically designed for drum-based applications, limiting its use with other container types.
All features
| Model Part Number | 5063750396668 |
|---|---|
| Brand | Lumatic |
Extended Product Information
FAQs
What is the primary use of this Lumatic barrel pump?
This pump is designed for manually transferring diesel, motor oil, gearbox oil, and hydraulic oil from standard 205-litre drums.
Can this pump be used for water or gasoline?
No, this pump is specifically designed for oil-based fluids and diesel. It is not suitable for water, gasoline, solvents, or other non-oil based liquids.
How often should I clean the pump?
It is recommended to clean the pump after each use, especially when switching between different types of oils, by flushing it with a compatible solvent or thinner.
What is the expected lifespan of the cast iron construction?
Cast iron is a durable material, and with proper care and maintenance, including keeping it dry and clean, the pump is built for long-term use in demanding environments.
Does the pump come with any hoses?
The product information does not specify if hoses are included; it is designed as a direct barrel pump. Please refer to specific product listings or packaging for included accessories.
How do I attach the pump to the drum?
The pump screws directly onto the opening of a standard 205-litre drum. Ensure a tight seal to prevent leaks during operation.
Troubleshooting
Pump is difficult to turn or is not transferring fluid.
Ensure the pump is properly seated in the drum. Check for any blockages in the intake or discharge spout. For very cold conditions, warmed fluid may flow more easily. Verify the handle is rotating in the correct direction for pumping.
Leaking from the drum connection.
Tighten the connection between the pump and the drum. Ensure the drum opening and pump threads are clean and free from debris. If threads are damaged, the connection may not seal properly.
Slow fluid transfer rate.
The viscosity of the fluid being pumped can affect the rate. Ensure the fluid is within the recommended range for this pump. Check for kinks in any attached hoses (if used) and ensure the pump intake is fully submerged.
Pros and Cons
Pros
- Robust cast iron construction ensures long-term durability.
- Suitable for a range of common workshop fluids.
- Designed for easy integration with standard 205-litre drums.
- Rotary action provides a steady and controllable flow rate.
- Ergonomic handle enhances user comfort during operation.
Cons
- Primarily designed for 205-litre drums, limiting versatility.
- Cast iron can be heavy, potentially impacting portability.
- May require more physical effort for very thick oils compared to powered pumps.
- Not suitable for highly corrosive or volatile liquids.
Setup, Compatibility & Care
Setup:
- Ensure the pump is securely attached to the 205-litre drum. The threaded connection should be tight to prevent leaks.
- Position the discharge spout towards the receiving container.
- Begin rotating the handle in a consistent, smooth motion to start the fluid transfer.
Compatibility:
- Drum Size: Optimized for standard 205-litre (55-gallon) drums.
- Fluid Types: Suitable for diesel, motor oil, gearbox oil, and hydraulic oil. Not recommended for water, gasoline, solvents, or other non-oil based fluids.
Care and Maintenance:
- After each use, particularly with lubricants, it is recommended to run a small amount of cleaning solvent or a compatible thinner through the pump to flush out residual oil. Ensure the solvent is also compatible with cast iron.
- Wipe down the exterior of the pump with a dry or slightly damp cloth to remove dirt and grime.
- Store the pump in a dry environment to prevent rust, especially on the cast iron components.
- Periodically check the handle and internal mechanisms for smooth operation.