Wide Cranked Chisel - 75 x 300mm - SDS Max

You need a rotary hammer with an SDS Max chuck. This chisel is not compatible with SDS or SDS Plus chucks.

No, this is a wide, cranked demolition chisel designed for heavy prying and lifting. It is not intended for detailed or fine chiseling.

Position the wide blade under the material you want to lift, then use the cranked design to apply steady upward pressure. Allow the rotary hammer's impact action to do the work.

SDS Max is designed for heavier-duty rotary hammers and larger bits, offering a more robust connection and greater power transfer than SDS Plus, which is used for lighter to medium-duty tools.

After cleaning off debris, ensure the chisel is completely dry before storing it in a dry environment. Applying a light coat of oil can offer additional protection against rust.

No, this chisel requires the percussive action of a rotary hammer with an SDS Max chuck. It will not function correctly with a standard hammer drill or a hammer drill without an SDS Max fitting.

Ensure the chuck is clean and free of debris. Verify that you are using an SDS Max chuck, as this chisel is not compatible with other types (SDS, SDS Plus).

Check that the chisel is securely locked into the hammer. Ensure the rotary hammer is set to the appropriate function (hammer-only if available) and that the tool is compatible with SDS Max accessories.

Cease use immediately. Excessive force or incorrect prying angles can cause bending. Inspect the chisel for damage and consider if a more robust tool or different technique is needed for the material.