Axis P1265 Mk II Covert IP security camera - Indoor

Best current price£365.90from PCHUB.UK
Best offers
Shopping.co.uk recommended and popular offers
Axis Dark/Light P1265 Mk Ii Covert Ip Security Camera Indoor 1920 X 1080 Pixels C
Visit shop
Best current price£365.90from PCHUB.UK
Shopping.co.uk recommended and popular offers
Axis Dark/Light P1265 Mk Ii Covert Ip Security Camera Indoor 1920 X 1080 Pixels C
Visit shop3 offers from £365.90 - £633.56
View price history by clicking the chart icon.
This guide helps you understand and use the AXIS P1265 Mk II, a discreet indoor security camera ideal for tight spaces. Its key benefit is its covert design, with a pinhole lens and separate sensor unit, allowing for hidden surveillance. Note that while it offers advanced analytics, optimal performance depends on proper network setup and sufficient lighting. This guide covers setup, features, troubleshooting, and more to help you get the most out of your AXIS P1265 Mk II.
| Brand | Axis |
|---|
The horizontal viewing angle is 91 degrees, and the vertical viewing angle is 45 degrees.
Yes, the AXIS P1265 Mk II supports PoE.
The camera supports MicroSD, MicroSDHC, and MicroSDXC cards.
The maximum resolution is 1920 x 1080 pixels (HDTV 1080p).
The operating temperature range is -20 to 45 °C.
No, this camera is designed for indoor use only. It has an IPX3 rating, which means it is protected against spraying water.
You can update the firmware through the camera's web interface. Download the latest firmware from the Axis website and follow the on-screen instructions.
Check the network connection and power supply. Ensure the cable is securely connected and that the network settings are configured correctly. Verify that the camera is powered on.
Adjust the camera settings, such as brightness, contrast, and WDR. Make sure the lens is clean and free of obstructions. Ensure the lighting conditions are suitable for the camera.
Verify the IP address is correct. Check your network configuration and firewall settings. Ensure you are on the same network as the camera. Try resetting the camera to factory defaults.
Verify that motion detection is enabled in the camera settings. Adjust the sensitivity levels and detection zones. Check that the camera has a clear view of the area.