Lindy KVM Extender Combo - 300m
Best current price£436.33from www.lindy.co.uk
Best offers
Shopping.co.uk recommended and popular offers
www.lindy.co.uk£436.33Visit shop LINDY KVM Extender Combo, 300m
Visit shopwww.lindy.co.uk£436.33Visit shop All Offers
2 offers from £436.33 - £517.55
View price history by clicking the chart icon.
Product Information
Full details
The Lindy 300m CAT5 KVM Extender Combo is designed for IT professionals and system administrators who need to control a computer or KVM switch from a distance. Its key benefit is extending VGA, USB, and PS/2 keyboard/mouse connectivity up to 300 meters over a single Cat.5e/6 cable, offering flexibility in workstation placement. A potential caveat is its reliance on PS/2 for keyboard and mouse, which may require adapters for newer USB-only peripherals.
All features
| Model Part Number | 39378 |
|---|---|
| Brand | Lindy |
Extended Product Information
FAQs
What is the maximum distance this KVM extender can reach?
The Lindy 300m CAT5 KVM Extender Combo supports distances of up to 300 meters (984 feet) using a single Cat.5e or Cat.6 Ethernet cable.
Does this extender support USB keyboards and mice?
The extender features PS/2 ports for keyboard and mouse. If you have USB peripherals, you will need appropriate PS/2 to USB adapters.
What is the maximum video resolution supported?
This KVM extender supports VGA resolutions up to 1920 x 1200 pixels.
Do I need to install any software to use this device?
No, the Lindy KVM Extender is designed for easy, user-friendly installation and does not require any software.
Can I control two computers from one remote station?
This specific model is designed to extend one computer's KVM connection. For controlling multiple computers, you would typically use a KVM switch in conjunction with the extender, or a multi-computer KVM extender.
What type of Ethernet cable should I use?
You should use a Cat.5e or Cat.6 Ethernet cable for optimal performance and distance.
Does this extender support audio?
No, this KVM extender does not support audio transmission.
Troubleshooting
No video signal at the remote location
Verify that the VGA cable is securely connected to both the computer and the remote monitor. Ensure the Cat.5e/6 cable is firmly plugged into both the transmitter and receiver. Check that both units are powered on and that the correct input is selected on the monitor.
Keyboard or mouse is not responding at the remote location
Confirm that the PS/2 keyboard and mouse cables are properly connected to the receiver unit and the peripherals. If using USB peripherals with PS/2 adapters, ensure the adapters are compatible and correctly connected. Try swapping keyboards or mice if possible.
Poor video quality or flickering
Ensure you are using a Cat.5e or Cat.6 cable of good quality and that it is not damaged. Check the resolution settings on the source computer. Verify that the maximum supported resolution of 1920x1200 is not exceeded.
Extender is not detected or shows no activity
Double-check all cable connections. Ensure that both the transmitter and receiver units are receiving power from their respective adapters. Try cycling the power on both units.
Pros and Cons
Pros
- Extends USB, VGA, and PS/2 KVM signals over long distances (up to 300m).
- Supports high video resolutions up to 1920x1200.
- Allows for control from both local and remote consoles.
- Easy installation with no software needed.
- Utilizes cost-effective CAT5e/6 cabling.
Cons
- Requires PS/2 keyboard and mouse connections, potentially needing adapters for modern USB peripherals.
- Only supports VGA video connections.
- External power adapters are required for both the transmitter and receiver units.
- Does not include audio extension capabilities.
Setup, Compatibility & Care
Setup:
- Connect the local transmitter unit to your computer using the provided VGA, PS/2 keyboard, and PS/2 mouse cables.
- Connect the remote receiver unit to a separate VGA monitor, PS/2 keyboard, and PS/2 mouse.
- Run a single Cat.5e or Cat.6 Ethernet cable between the RJ45 ports on the transmitter and receiver units. The maximum supported distance is 300 meters.
- Connect the external power adapters to both the transmitter and receiver units and plug them into power outlets.
- Ensure your computer is powered on and the remote workstation peripherals are connected. The system should now be operational.
Compatibility:
- Video: VGA signals.
- Keyboard/Mouse: PS/2 interface. Note: If your keyboard or mouse uses USB, you will need appropriate PS/2 to USB adapters.
- Cable: Cat.5e or Cat.6 Ethernet cable.
- Operating Systems: Compatible with all operating systems that support VGA output and PS/2 input.
Care:
- Keep the units in a well-ventilated area to prevent overheating.
- Avoid exposing the units to moisture or extreme temperatures.
- Clean the exterior with a dry, soft cloth. Do not use liquid cleaners.