Best current price£13.20from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£13.20Visit shop Lindy 36921 1m DisplayPort to HDMI 10.2G Cable
Visit shop
www.lindy.co.uk£17.99Visit shop 2m Display Port to HDMI 4K30Hz Adapter Cable
Visit shop31 offers from £13.20 - £31.99
View price history by clicking the chart icon.
The Lindy 3m DisplayPort to HDMI 10.2G Cable is designed for users with DisplayPort-equipped computers who need to connect to an HDMI display. Its key benefit is delivering sharp 4K UHD resolution for clear visuals, suitable for both productivity and entertainment. A caveat to be aware of is that audio output over HDMI is dependent on the graphics card's support for audio over DisplayPort. This cable offers a straightforward way to extend your workspace or connect to a high-definition monitor, supporting resolutions up to 3840x2160@30Hz and uncompressed 7.1 audio.
| Colour | Black |
|---|---|
| Model Part Number | 36923 |
| Brand | Lindy |
The Lindy DisplayPort to HDMI cable supports a maximum resolution of 3840 x 2160 pixels (4K UHD) at a refresh rate of 30Hz.
Yes, the cable supports audio pass-through, including uncompressed 7.1 audio, DTS-HD Master Audio, and Dolby TrueHD, provided your DisplayPort source device supports audio output over DisplayPort.
No, this cable features Plug and Play functionality and does not require any software installation or driver setup.
The cable has a length of 3 meters.
No, this cable is designed to connect a DisplayPort source device to an HDMI display device. It is not intended for connecting HDMI sources to DisplayPort monitors.
At 4K (3840 x 2160) resolution, the cable supports a refresh rate of 30Hz.
The cable is certified with CE and FCC standards.
Ensure the DisplayPort connector is securely plugged into the source device and the HDMI connector is firmly connected to the display. Verify that the display's input source is set to the correct HDMI port. Check if the source device's DisplayPort output is enabled and configured for video output. Restart both the source device and the display.
Confirm that the selected resolution in your operating system's display settings matches the capabilities of both the source device and the display. Ensure the resolution is set to 3840x2160@30Hz or a supported lower resolution like 1080p. Check the graphics card driver for updates.
Verify that your graphics card or source device supports audio output over DisplayPort. Check your system's audio output settings and ensure the HDMI display or audio device is selected as the default playback device. Consult your graphics card manufacturer's documentation for specific audio output configurations.
Ensure all connections are secure. Try using the cable with a different HDMI port on the display or a different DisplayPort on the source device if available. Test with a shorter, known-good cable if possible to rule out cable fault. Avoid routing the cable near strong electromagnetic interference sources.
Setup:
This cable is designed for Plug and Play functionality, meaning no additional drivers or software installation are required. Simply connect the DisplayPort end to your computer or source device and the HDMI end to your display or projector. Ensure both devices are powered on.
Compatibility:
Care:
