Osmo Polyx-Oil Original - Clear Matt - 5Ml

Osmo Polyx-Oil Original uses natural oils and waxes that penetrate the wood, offering a breathable, durable finish that enhances the wood's natural character, unlike surface films like varnish.

The 5ml sachet is a sample size, ideal for testing the finish on a small area, a sample board, or a very small item like a coaster or small decorative piece. It is generally not sufficient for flooring, furniture, or doors.

Recoatable after approximately 8-10 hours, depending on temperature and humidity. Full drying and curing can take several days to weeks, during which time the surface should be protected from heavy use and moisture.

Generally, it's best applied to bare, sanded wood. If applying over an existing finish, ensure it is completely removed, or at least thoroughly abraded and cleaned, and test for compatibility first. It is not designed to be applied over most lacquers or paints.

Regular cleaning with a damp cloth is recommended. For deeper cleaning or to refresh the finish, use Osmo Wash and Care. For worn areas, a maintenance coat of Osmo Polyx-Oil or a specific maintenance oil can be applied.

Osmo Polyx-Oil Original Clear Matt is designed to maintain the natural color of the wood and resist yellowing. The oils may initially 'wet' the wood, making it appear slightly richer, but it should not significantly yellow over time.

Yes, Osmo Polyx-Oil Original is suitable for interior wood surfaces including kitchen worktops, provided they are properly prepared and the finish is maintained regularly due to constant exposure to moisture and wear.

Ensure the oil was applied thinly and evenly with the recommended applicator (e.g., brush, roller). Work along the grain. Avoid applying too much oil. Wipe off any excess thoroughly within the recommended time frame. Ensure the surface was properly prepared.

This is often due to the oil's nature to 'wet' the wood, similar to water but permanent. Ensure you are using the 'Clear Matt' version if a natural, non-darkening look is desired. Test on a spare piece of wood first. For significant darkening, a light sanding might be required before reapplication.

This usually indicates too much oil was applied or excess was not wiped off properly. Ventilate the area well and allow more drying time. If still tacky after 24-48 hours, you may need to gently abrade the surface with fine steel wool or sandpaper and wipe clean before applying a very thin, well-wiped coat.

Ensure the finish has fully cured (this can take several days to weeks depending on conditions). If the issue persists after curing, the application may have been too thin or incomplete. Reapply a thin coat of Polyx-Oil to the affected area after cleaning.